Author Topic: That ball bearing behind the front brake switch (Read 870 times)

raul · « **on:** July 25, 2021, 01:25:15 PM »

Does anyone know the diameter of the little ball bearing under the brake switch at the front brake lever of a 97 California? The little devil decided to go on a roll about while I was changing the brake switch. A bb is too small.

Rolf Halvorsen · « **Reply #1 on:** July 25, 2021, 01:44:23 PM »

Part No: 92295708 Ø3/16" which is about Ø4,76mm.
Rolf

raul · « **Reply #2 on:** July 25, 2021, 04:54:47 PM »

Thank you. I'll see if I can find one tomorrow.

LowRyter · « **Reply #3 on:** July 25, 2021, 05:45:27 PM »

Ace Hardware.

nc43bsa · « **Reply #4 on:** July 25, 2021, 10:31:28 PM »

I lost mine last year when was investigating why the switch didn't work on my MilleGT. I ordered several of them the next time I called MG Cycle.

Now that I have spares, I'll eventually find the original ball on the garage floor.

raul · « **Reply #5 on:** July 26, 2021, 09:38:16 AM »

I ordered a bag of them from Amazon. 100 stainless steel balls for $5.99. They will be here Wednesday. Now that I'll have plenty, I'll never lose another one again.

Wildguzzi.com

News:

Author Topic: That ball bearing behind the front brake switch (Read 870 times)

raul

That ball bearing behind the front brake switch

Rolf Halvorsen

Re: That ball bearing behind the front brake switch

raul

Re: That ball bearing behind the front brake switch

LowRyter

Re: That ball bearing behind the front brake switch

nc43bsa

Re: That ball bearing behind the front brake switch

raul

Re: That ball bearing behind the front brake switch