Tachometer Compatibility – 96 California 1100i and 97 EV

[ChrisG]

I have a 96 Cali 1100i.  The tach is not working (just quit). My part, GU2976250, is listed for 94-97 California 1100i.

Part #GU03767200 is listed for the California EV from 97-2000I. I found one available. It is a different face color. Is this tach compatible with my 1100i?

Alternatively, any recommendations for tach repair?

Chris

[ChrisG]

I think I answered my own question - Guzziology has them as different sizes - the GU2976250 is 100mm, the GU03767200 is 80mm, so it wouldn't fit right (even if it is compatible electrically).

So - repair suggestions?

Chris

[guzzista]

   https://joellevinecompany.com/

[Tom]

I think I answered my own question - Guzziology has them as different sizes - the GU2976250 is 100mm, the GU03767200 is 80mm, so it wouldn't fit right (even if it is compatible electrically).

So - repair suggestions?

Chris

Foam or rubber weather stripping to take up the gap in the housing or trade it with someone off of the forum list.

[PeteS]

Depends what is wrong with it but likely not worth a repair. Assuming its electronic its basically a voltmeter. The movement is very fragile and breaks easily. Speedos are different and may be worth repairing. Check out aftermarket ones. I made a new mounting plate for my EV to fit a aftermarket tach.




Pete

[tris]

Might be worth checking out speedhut
https://www.speedhut.com/

[bigbikerrick]

Like Tris suggested, Soeedhut is the way to go.
I put a speedhut tach in my EV, and it works flawlessly. Great company to deal with. I also installed one in a Cal II I had.
Rick.

[Tom]

+1 on Speedhut.   

[ChrisG]

Thank you all. I'll see if Joel Levine can fix it, and if not, Speedhut for a replacement.