Does anyone know part number for the petcock rebuild gasket?

[NCAmother]

I have a v65 tank with 16mm x 1mm petcocks, does anyone have the part number for the rebuild gasket?  Thanks 🙏

[Antietam Classic Cycle]

I don't know that there is a part number. Perhaps it's one of these?
https://www.harpermoto.com/moto-guzzi-parts/fuel-and-intake/petcocks-and-repair-parts/

[jrt]

I'll have to look it up, but there is someone here that had gnomes manufacture the gaskets- at least for loop frame petcocks.  Name escapes me at the moment, but a really good fellow to deal with. 
Yes, gnomes, that's not a typo.  Damn good ones too.

[bigbikerrick]

I'll have to look it up, but there is someone here that had gnomes manufacture the gaskets- at least for loop frame petcocks.  Name escapes me at the moment, but a really good fellow to deal with. 
Yes, gnomes, that's not a typo.  Damn good ones too.

Bruce Giller is the guy with the hard working knomes, that make petcock gaskets. I put a pair in my eldo's sugarcubes, about 12 years ago,and they work excellent. Bruce makes them out of Viton.
Rick D.

[bigbikerrick]

Bruce can be found on the Loop List.
Rick D.

[vintagehoarder]

Bruce can be found on the Loop List.
Rick D.

Loop list??

[Nick]

Those gnomes sure do a good job.
Here is Bruce's email that I have: bcgiller at gmail dot com

[MMRanch]

NCAmother

Here is all the gasket numbers anyone could ever need ... except head and exaust gaskets .   

Form-a-gasket Ultra Gray.     You put a thick film on both sides ... wait 10 minutes , put the two pieces together finger tight ... wait 30 minutes , then tighten to your spec.     

Never leak , made to fit , and easy as can be !   

Don't make the "Thick Film" thick enough to squeeze out too much , but just a little .  The putting together finger (lightly)  tight and waiting is the most important part  ... you can wait a whole day before drawing it tight  if you want a "thick" gasket.
 

[guzziart]

Bruce Giller is the guy with the hard working knomes, that make petcock gaskets. I put a pair in my eldo's sugarcubes, about 12 years ago,and they work excellent. Bruce makes them out of Viton.
Rick D.

   I've had them in my Eldo since '17.

Art