T3 VIN Plate

[wirespokes]

I've found the VIN plate at Stein Dinse, and somewhere else, but they weren't in English. Do you have a source?

Is there a problem with me stamping in the data myself? The ones that come stamped seem rather expensive.

[Antietam Classic Cycle]

Harper's used to have them. You might check with Moe @ Cycle Garden.

I've stamped my own, practicing first on some scrap aluminum so that I get the force need just right. The stamps my late father bought 70 years ago are a perfect match in both size and font. 

Where have you found them pre-stamped? 

[cliffrod]

If you don’t have or cannot source stamps with the correct font, annother option is to take them to a competent jeweler to be engraved to match an old vin tag. 

[wirespokes]

Here's one on Bender's site:

https://www.thisoldtractor.com/moto_guzzi_loopframe__tag_replacement.html

https://www.khneisser.ch/seimm-moto-guzzi-co-usa

There's one in the Netherlands for 15 euro, but won't ship to the US.

I'll check with Harpers - thanks Charlie. 

[Antietam Classic Cycle]

Here's one on Bender's site:

https://www.thisoldtractor.com/moto_guzzi_loopframe__tag_replacement.html

https://www.khneisser.ch/seimm-moto-guzzi-co-usa

There's one in the Netherlands for 15 euro, but won't ship to the US.

I'll check with Harpers - thanks Charlie.

Khneisser shows as out of stock, but I contacted them and they still have a few. I'll likely be ordering a few unless Harper's has them, please report back if they do.

[wirespokes]

Will do, Charlie.

On another note, it appears the non English versions are available. Any idea if that would be a problem here in the USA?

[Antietam Classic Cycle]

Will do, Charlie.

On another note, it appears the non English versions are available. Any idea if that would be a problem here in the USA?

I doubt having a non-English VIN tag on a 50 year old bike would be an issue.

[wirespokes]

I'm kind of thinking the same, Charlie.