How to disassemble T3 Headlight Ring?

[Dimples]

What is the sequence to disassemble the headlight ring for bulb replacement?
Is there a technique for removing/replacing the 2 wire retaining springs without damaging them or the outer ring?

[guzzisteve]

Yes, you depress the 2 wires on ea spring & move towards you out of the groove they are in. Do this to all of them, might be 5 of them. It then comes out.

[Dimples]

Disassembled and reassembled the rings:
1. I cut a wood block (photo) to use a needle nosed pliers to remove the pair of wire retaining springs.
2. Removed the pivot adjusting screw.
3. Removed the two C-clips and pivot pins.
4. Separated the two inner rings and bulb assembly from the outer ring.
5. Removed four flat-head screws and separated the inner rings to replace the bulb.