Author Topic: 2007 Breva 1100  (Read 4743 times)

Offline Jon8V

  • New Egg
  • *
  • Posts: 10
  • Location: North Carolina
2007 Breva 1100
« on: May 08, 2026, 01:18:21 PM »
Hey guys, new owner here. I've had a Griso 1200 the last few years (hence my screen name) though I recently sold it to pick up this guy. I loved my Griso but it was time for something a bit more comfortable and capable of longer touring. Both the Griso and 1200 Sport are bikes I've wanted to own since I started riding about 13 years ago. With no 1200 sports for sale anywhere near me, I grabbed the next best thing! First impressions are very good. I do like the liveliness of the 1200 8v compared to the 1100 but this is still no slouch. The riding position is great and exactly what I was looking for coming from the Griso. It seems to handle better too even with the squared off tires currently on it.

The previous owner fitted it with the center stand, OEM handguards, OEM heated grips, Heli Riser bars, Puig windscreen, OEM tail rack with bag, and a cat delete from Guzzitech.





Of course it's getting warm out now so the hanguards and screen are off for the moment and I put some sleeker mirrors on it. The Dart flyscreen brackets for the Griso also fit it well enough and I've got both a short and long screen to make use of:






First thing I did was throw a beetle map on it. I'm working on going through all of the fluids and will be fitting new tires this evening. Long term goals are to match the aesthetics of the 1200 sports. I've got KC34 handle bar adapters en route and will someday hopefully be able to find the sport tail cover and headlight fairing. I'm also trying to track down a set of OEM side cases since the bike already has the brackets and hardware to mount them.

I know this isn't a typicall build/restoration post but I wanted someplace to document maintenance and mods for the next owner when I inevitable sell/trade it for my next Guzzi  :grin:



Offline Jon8V

  • New Egg
  • *
  • Posts: 10
  • Location: North Carolina
Re: 2007 Breva 1100
« Reply #1 on: May 23, 2026, 02:16:57 PM »
I've been enjoying getting to know the bike.

-Clutch and front brakes are bled.
-Installed Sport Attack 2 tires front and rear. The ones that came on the bike were pretty squared off so it's handling real nice now.
-Installed MPH Cycles starter relay bypass.
Changed CARC and transmission fluids. Waiting on a filter before I can do the engine oil.

And today I installed a Puig Vision windscreen. I ordered one for the BMW R9T and was able to make it work with some extra hardware I had laying around. Then I spent the last few hours pulling the exhaust off to give it a good sanding and polish. It took some work but the almost 20 years of crud and grime stains are gone! I look forward to seeing them turn gold once I can ride and put some heat through them.








« Last Edit: May 23, 2026, 02:17:16 PM by Jon8V »

Offline Jon8V

  • New Egg
  • *
  • Posts: 10
  • Location: North Carolina
Re: 2007 Breva 1100
« Reply #2 on: May 24, 2026, 11:45:37 AM »
There's that gold!






Offline Jon8V

  • New Egg
  • *
  • Posts: 10
  • Location: North Carolina
Re: 2007 Breva 1100
« Reply #3 on: May 24, 2026, 03:39:13 PM »
After that ride I decided to work towards doing the valves, spark plugs, air filter, and throttle body adjustment.



Even after flashing a Beetle map when I first got the bike, it was still idling high at about 1,800 rpms and hits a pretty abrupt wall when closing throttle to engine brake. I figured doing all of the above would sort that out until I pulled the tank off. I think this might have had something to do with that:



I have no idea what the hell that is but it was pretty jammed inside the snorkel so I'm thinking the bike should be a bit smoother now  :violent1:

I need a thinner socket to get the inner spark plugs out but in the meantime I installed an Oxford 12v junction box. It just barely clears the seat pan:


Online Huzo

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • Posts: 14186
  • Location: Creswick Australia
Re: 2007 Breva 1100
« Reply #4 on: May 24, 2026, 07:32:50 PM »
Make sure you blow around the plug area with compressed air before removing the plug/s.
I failed to do it once on my Norge and there was a small stone teetering on the brink of falling in…!

Offline Jon8V

  • New Egg
  • *
  • Posts: 10
  • Location: North Carolina
Re: 2007 Breva 1100
« Reply #5 on: May 25, 2026, 07:36:23 AM »
Good suggestion! I've got a few sockets getting delivered today so hopefully one of them will fit. I figure I'll also let them soak in some PB Blaster in the meantime since they're looking pretty rusty.

Online Dave Swanson

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 4663
  • Northern Illinois USA
Re: 2007 Breva 1100
« Reply #6 on: Today at 07:21:03 AM »
This Breva got lucky when it fell into your hands.   Excellent work so far!
Dave Swanson - Northern IL
1935 GTS
1968 V700
1970 Ambassador
1973 V7 Sport
1974 Eldo
1974 Police Eldo
1976 Convert
1977 Lemans 1.2
1980 T3 California
1993 1000S- Sparklehorse
1998 V11 EV HDM
2004 V11S - Eraldo-ized
2016 Griso - Beetle-ized
2021 V7-850 Centenario
2022 V85TT
2023 V100S

MGNOC L-780

Offline WenzelB6

  • WenzelB6
  • New Egg
  • *
  • Posts: 3
    • farmer
  • Location: Sudety Czech
Re: 2007 Breva 1100
« Reply #7 on: Today at 08:06:31 AM »
I wonder, Your bike has got the brackets for side cases, but the cases has not been included ?

Offline Jon8V

  • New Egg
  • *
  • Posts: 10
  • Location: North Carolina
Re: 2007 Breva 1100
« Reply #8 on: Today at 10:51:59 AM »
This Breva got lucky when it fell into your hands.   Excellent work so far!

Thanks! Half the fun of a new bike is tearing into it  :evil:

Offline Jon8V

  • New Egg
  • *
  • Posts: 10
  • Location: North Carolina
Re: 2007 Breva 1100
« Reply #9 on: Today at 10:53:02 AM »
I wonder, Your bike has got the brackets for side cases, but the cases has not been included ?

Nope but I already picked up a used set. Only problem is the key is missing for them so I need to see if I can get the lock cylinder apart to repin it or just remove the pins altogether.

Online macaril@optusnet.com.au

  • New Egg
  • *
  • Posts: 2
  • Location: Australia
Re: 2007 Breva 1100
« Reply #10 on: Today at 04:23:09 PM »
Hi
What did you use on those pipes, they look great, cheers Rob

***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
Best quality vinyl available today. Easy application.
Advertise Here
 

20 Ounce Stainless Steel Double Insulated Tumbler
Buy a quality tumbler and support the forum at the same time!
Better than a YETI! BPA and Lead free.
Advertise Here