1400 Police Highway Bars

[TN Mark]

Has anyone ever installed the California 1400 Police front highway bars on their 1400? They’re beefier, extend out farther and they have a welded in ‘shelf’ to mount a siren etc. The item numbers are: 2B003538 and 2B003539.

I could be wrong but the OEM California 1400, as well as the Hepco-Becker front highway bars, look tucked in so much as to be more decorative than functional.

[guzzisteve]

You might try a dealer in EU, I don't think they sold to the police here in USA. Like TLM in Netherlands or Augo in Mandello

[Bill W]

Mark
The stock bars are mainly for protecting the engine, and they do a excellent job of it ( ask me how I know  )

[TN Mark]

Mark
The stock bars are mainly for protecting the engine, and they do a excellent job of it ( ask me how I know  )

I can see you’re 100% correct. I have the Hepco-Becker highway bars on my Eldorado. Maybe they’re closer to the engine than the OEM California Touring Highway bars. When I can get out to the garage I’ll measure the H-B bars for how far they are from the engine case. I can then compare that to the OEM CA Touring bars.

The stock CA 1400 Touring bars are over $400 each and the Police version is around $475 each.

[TN Mark]

From the frame rail to the outside edge of the Hepco & Becker front highway bars is about 9”.

Can someone please measure what the OEM California Touring bars measure?

[TN Mark]

The H&B highway bars measure the same from the frame rail to the outside of the bar as the OEM California Touring bars.

Next up, try to get that same measurement of the OEM Police Highway bars for the CA 1400.

[TN Mark]

The Police highway bars for the 1400’s measures about 12” from the mounts outward to the bars. So, they extend out an additional 3” compared to the standard 1400 highway bars from Moto Guzzi or H&B.