Author Topic: New-to-me Stornello  (Read 813 times)

Offline BUGMOTO

  • New Egg
  • *
  • Posts: 19
    • BUGMOTO
  • Location: Portland, Oregon
New-to-me Stornello
« on: November 12, 2026, 08:20:56 PM »
Howdy folks. I recently found myself a 2016 V7 II Stornello, and I'd love to bring it back a bit closer to its original glory. It's missing the brushed-aluminum side number plate thingies, along with the brushed-aluminum wind deflector. Anyone have any thoughts on where I could find these? I'll look on eBay but anywhere else? It's been many, many years since I've used eBay and not sure I wanna go back.... This being a limited edition bike I would assume it'll be nearly impossible finding this stuff.





For anyone interested, here's a video I did about the bike:
https://www.youtube.com/watch?v=_2759AscXBs

Dan Fellini (BugMoto)

2016 Moto Guzzi V7 II Stornello
2015 BMW R nineT
2022 BMW R1250GS

Online Bulldog9

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 3683
  • Location: NY'r resettled in the Old Dominion
Re: New-to-me Stornello
« Reply #1 on: November 12, 2026, 08:56:10 PM »
Howdy folks. I recently found myself a 2016 V7 II Stornello, and I'd love to bring it back a bit closer to its original glory. It's missing the brushed-aluminum side number plate thingies, along with the brushed-aluminum wind deflector. Anyone have any thoughts on where I could find these? I'll look on eBay but anywhere else? It's been many, many years since I've used eBay and not sure I wanna go back.... This being a limited edition bike I would assume it'll be nearly impossible finding this stuff.





For anyone interested, here's a video I did about the bike:
https://www.youtube.com/watch?v=_2759AscXBs

Congrats! U think the V7ii is a sweet spot on the V7 line. 6 speed/ABS/TC but with the Heron head. The tune on the Stornello really makes the bike feel spunky. I really love my Stornello.

The PO didn't have the take off parts? That sucks. I don't know why people don't keep parts when they swap things, especially on a limited one year model like this.

My only real complaint on the Stornello was the stock suspension. New Fork Springs and Rear shocks were a game changer  Beetle has a really good map that erases the little torque dip at 3k.







« Last Edit: November 12, 2026, 08:58:38 PM by Bulldog9 »
MGNOC#23231
The Living: 1976 Convert, 2007 GRiSO, 2012 Norge GT, 2016 Stornello #742, 2023 V85 TT
The Departed: 2017 MGX, 2014 Norge GT, 2004 Breva 750, 2008 1200 Sport
In Stasis: 1978 XS750, XS1100SF

Online Michael_A

  • Hatchling
  • **
  • *
  • Posts: 81
    • Penguin Video Productions
  • Location: Out in the west part of Texas...
Re: New-to-me Stornello
« Reply #2 on: November 13, 2026, 07:14:20 AM »
You could try these:
https://www.baakmotocyclettes.com/en/v7-i-v7-ii-2007-2017/6146-side-cover-with-number-board-for-moto-guzzi-v7-i-ii
Not original, but does keep the spirit of things. For originals, you may be relegated to haunting Ebay, and it will likely take a while.
May also try calling Harpers Moto Guzzi (on-line vendor) they have a lot of stuff that isn't always on their website so you may just get lucky.
Very cool bike, BTW! I'd love to have one but they are so rare I may have to resort to doing a "recreation" of sorts at some point.

Online Michael_A

  • Hatchling
  • **
  • *
  • Posts: 81
    • Penguin Video Productions
  • Location: Out in the west part of Texas...
Re: New-to-me Stornello
« Reply #3 on: November 13, 2026, 07:17:52 AM »
Got curious and looked on Ebay. Did a search for "stornello side covers".
THERE IS AN OEM SET FOR SALE RIGHT NOW!
Probably should move quick if you want them!

Online Dirk_S

  • www.dirkshearer.com
  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 2501
  • Doodler of doodles
    • www.DirkShearer.com
  • Location: Portland, Maine, U.S.
Re: New-to-me Stornello
« Reply #4 on: November 13, 2026, 07:29:00 AM »
MAS Engineering is the Italian firm who designed and produced many, if not most, if not all, of the aluminum parts for the modern Guzzis, including fenders, number plates, headlight fairing, etc. I think the parts in Guzzi’s OEM factory accessory manual are mostly supplied by them. You might be able to find those parts in a current accessory catalog, but they’ll be hecka pricey. For a couple years, MAS Engineering also had a website that they sold their parts direct-to-customer. I don’t think it’s active anymore; it used to be, and I tried to direct people over to them a few times on this forum, because the prices were much better skipping the middle man. Stein-Dinse in Germany carries some of their parts—you’ll be paying for the shipping, though. I bet AF1 or MG Cycle might still have some parts. It may also be worth reaching out to MAS Engineering to see if they would sell you anything they may have.
« Last Edit: November 15, 2026, 06:44:52 PM by Dirk_S »
Current: '18 Guzzi V7 III Rough, '17 Guzzi V9 Bobber, ‘78 BMW R80/7, 1986 Sputnik sidecar

Previous: '16 Guzzi V7 II Stone, ‘15 Ural Gear Up, '11 Suzuki TU250X, ‘86 Guzzi V65 Lario, '78/‘80 Honda CX500, '77 Kawasaki KZ400 Special

Online SIR REAL ED

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 3312
  • uh.... it's personal....
  • Location: Forest, VA
Re: New-to-me Stornello
« Reply #5 on: November 13, 2026, 08:37:01 AM »
Howdy folks. I recently found myself a 2016 V7 II Stornello, and I'd love to bring it back a bit closer to its original glory. It's missing the brushed-aluminum side number plate thingies, along with the brushed-aluminum wind deflector. Anyone have any thoughts on where I could find these? I'll look on eBay but anywhere else? It's been many, many years since I've used eBay and not sure I wanna go back.... This being a limited edition bike I would assume it'll be nearly impossible finding this stuff.





For anyone interested, here's a video I did about the bike:
https://www.youtube.com/watch?v=_2759AscXBs

Cool bike.  IMO, perhaps the best looking Guzzi I have ever seen in the flesh.

Someday, I might buy one....

1999 Suzuki DR 650 w/790cc kit
2002 MZ Skorpion
1994 DR Skorpion

Online SIR REAL ED

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 3312
  • uh.... it's personal....
  • Location: Forest, VA
Re: New-to-me Stornello
« Reply #6 on: November 13, 2026, 08:39:23 AM »
MAS Engineering is the Italian firm who designed and produced many of if not most if not all of the aluminum parts for Guzzi, including fenders, number plates, headlight fairing, etc. I think the parts in Guzzi’s OEM factory accessory manual are mostly supplied by them. You might be able to find those parts in a current accessory catalog, but they’ll be hecka pricey. For a couple years, MAS Engineering also had a website that they sold their parts direct-to-customer. I don’t think it’s active anymore—it used to be, and I tried to direct people over to them a few times on this forum, because the prices were much better skipping the middle man. Stein-Dinse in Germany carries some of their parts—you’ll be paying for the shipping, though. I bet AF1 or MG Cycle might still have some parts. It may also be worth reaching out to MAS Engineering to see if they would sell you anything they may have.

Shirley, the faithful don't care about price.  Only heretics would balk at price.

1999 Suzuki DR 650 w/790cc kit
2002 MZ Skorpion
1994 DR Skorpion

Online Dirk_S

  • www.dirkshearer.com
  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 2501
  • Doodler of doodles
    • www.DirkShearer.com
  • Location: Portland, Maine, U.S.
Re: New-to-me Stornello
« Reply #7 on: November 13, 2026, 09:57:42 AM »
Shirley, the faithful don't care about price.  Only heretics would balk at price.

Admitting outright that you’ve been replaced by pod people or a Nigerian prince would be understood just as clearly.
« Last Edit: November 13, 2026, 11:23:51 AM by Dirk_S »
Current: '18 Guzzi V7 III Rough, '17 Guzzi V9 Bobber, ‘78 BMW R80/7, 1986 Sputnik sidecar

Previous: '16 Guzzi V7 II Stone, ‘15 Ural Gear Up, '11 Suzuki TU250X, ‘86 Guzzi V65 Lario, '78/‘80 Honda CX500, '77 Kawasaki KZ400 Special

Online Bulldog9

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 3683
  • Location: NY'r resettled in the Old Dominion
Re: New-to-me Stornello
« Reply #8 on: November 13, 2026, 11:11:53 AM »
Just admitting outright that you’ve been replaced by pod people or a Nigerian prince would be understood just as clearly.

Replaced?!?!?! Ed is an original pod person............. ..  :grin:
MGNOC#23231
The Living: 1976 Convert, 2007 GRiSO, 2012 Norge GT, 2016 Stornello #742, 2023 V85 TT
The Departed: 2017 MGX, 2014 Norge GT, 2004 Breva 750, 2008 1200 Sport
In Stasis: 1978 XS750, XS1100SF

Online SIR REAL ED

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 3312
  • uh.... it's personal....
  • Location: Forest, VA
Re: New-to-me Stornello
« Reply #9 on: November 13, 2026, 06:22:39 PM »
Replaced?!?!?! Ed is an original pod person............. ..  :grin:

We accept no substitutes!
1999 Suzuki DR 650 w/790cc kit
2002 MZ Skorpion
1994 DR Skorpion

Online Yan

  • Hatchling
  • **
  • Posts: 53
  • Location: BC, Canada
Re: New-to-me Stornello
« Reply #10 on: November 13, 2026, 07:43:10 PM »
Although I understand and generally agree with attempting to bring a bike back to its original state (as it is most often just better), in this case I think those aluminum side plates and the aluminum wind deflector are just a bit odd 'fakish'-looking parts, and I am not sure why they are there.  I think that, as Bulldog wrote, you are better off spending your money on better suspension, to really enjoy riding it (as opposed to looking at it).
2007 Griso 1100

Offline BUGMOTO

  • New Egg
  • *
  • Posts: 19
    • BUGMOTO
  • Location: Portland, Oregon
Re: New-to-me Stornello
« Reply #11 on: November 13, 2026, 11:08:40 PM »
Although I understand and generally agree with attempting to bring a bike back to its original state (as it is most often just better), in this case I think those aluminum side plates and the aluminum wind deflector are just a bit odd 'fakish'-looking parts, and I am not sure why they are there.  I think that, as Bulldog wrote, you are better off spending your money on better suspension, to really enjoy riding it (as opposed to looking at it).

I think this is the right answer. If I stumble upon them really cheap one day, maybe I'll grab them. But there's more on this bike that isn't original, so I'm not gonna sweat trying to bring it back to its original form. Just gonna enjoy it for what it is.

This bike is so damned fun to ride, and it sounds so, so good.

Thanks y'all.
Dan Fellini (BugMoto)

2016 Moto Guzzi V7 II Stornello
2015 BMW R nineT
2022 BMW R1250GS

Offline Brand X

  • Gaggle Mentor
  • ****
  • Posts: 481
Re: New-to-me Stornello
« Reply #12 on: November 15, 2026, 04:10:29 PM »
I liked the side covers from the early Racers on the Stornello best  The pie plates really are a afterthought in design. Piss poor really.  Beetle map would be the first thing done.

The old saying of (Some people just really know how to fix up a Motorcycle ) applies to your bike. :evil: Good start though..
« Last Edit: November 15, 2026, 04:22:52 PM by Brand X »

Offline Air-Cooled

  • Gaggle Mentor
  • ****
  • Posts: 365
Re: New-to-me Stornello
« Reply #13 on: November 15, 2026, 06:29:10 PM »
You can order this part via a Guzzi dealer or Stein-Dinse.  It is part number 2B003254.  I did a few years ago and I'll bet they still have them.
« Last Edit: November 15, 2026, 07:54:06 PM by Air-Cooled »
1973 Moto Guzzi V7 Sport, 2016 Moto Guzzi Stornello, 2023 Vespa Primavera, 2025 BMW R1300GS, 2027 Ducati Formula 73, 2023 Honda XR650L

Online chuck peterson

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 5540
  • Location: New Haven CT
Re: New-to-me Stornello
« Reply #14 on: November 16, 2026, 08:17:47 AM »
250 euro becomes $275 for 2 side panels with the brushed or satin black number boards attached from the BAAK site

The brushed metal (or black) plates are used for competitions. Your rider number in black or white contrast on the board.

Take it flat track racing! Have a blast
"I'd like to thank all my friends who have kept my Guzzi's going, but mostly...TOMB."
150k on Verts
750 Nevada
400f
R5 Yammie
BV250
4x 1976 Moto Demm Smily,, now 5, oops now 6, oops now 7
1980 SP1000 in little bits and pieces

Online Dirk_S

  • www.dirkshearer.com
  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 2501
  • Doodler of doodles
    • www.DirkShearer.com
  • Location: Portland, Maine, U.S.
Re: New-to-me Stornello
« Reply #15 on: November 16, 2026, 08:27:56 AM »
As someone who’s been on the track a couple times—and my feelings were the same before that—I find number plates slapped onto a bike from the factory to be pretty poser’esque. But then again, there are scores of Jeeps that never get ridden off-road, Carhartt overalls that never see an ounce of filth, and the term ‘adventure’ gets floated around like it’s the king of desirable Scrabble words. 50-point Bingo!
« Last Edit: November 16, 2026, 08:28:26 AM by Dirk_S »
Current: '18 Guzzi V7 III Rough, '17 Guzzi V9 Bobber, ‘78 BMW R80/7, 1986 Sputnik sidecar

Previous: '16 Guzzi V7 II Stone, ‘15 Ural Gear Up, '11 Suzuki TU250X, ‘86 Guzzi V65 Lario, '78/‘80 Honda CX500, '77 Kawasaki KZ400 Special

Offline Scott Carpenter

  • Hatchling
  • **
  • Posts: 81
  • Banjo playing secular humanist who reads a lot
  • Location: South West England
Re: New-to-me Stornello
« Reply #16 on: November 16, 2026, 01:00:36 PM »
Couldn't hear ya Bug, I must been behind that Stornello of yours! Deaf as a post now.  :bike-037:

But seriously, a very cool bike that must be heaps of fun to ride. I have seen a few around and they look great. But at present I have 3 small blocks at home, though in my defence one is not mine!
"The Dude abides. I don't know about you but I take comfort in that. It's good knowin' he's out there. The Dude. Takin' 'er easy for all us sinners."

Offline BUGMOTO

  • New Egg
  • *
  • Posts: 19
    • BUGMOTO
  • Location: Portland, Oregon
Re: New-to-me Stornello
« Reply #17 on: November 17, 2026, 04:05:37 PM »
Couldn't hear ya Bug, I must been behind that Stornello of yours! Deaf as a post now.  :bike-037:

But seriously, a very cool bike that must be heaps of fun to ride. I have seen a few around and they look great. But at present I have 3 small blocks at home, though in my defence one is not mine!

It is SOOOOO much fun to ride. I put the baffle back in the exhaust, and while it's still loud, it's not obnoxious. And it changes the tone to something that just sounds and feels like a cat purring. It's sublime. I love it.
Dan Fellini (BugMoto)

2016 Moto Guzzi V7 II Stornello
2015 BMW R nineT
2022 BMW R1250GS

Offline Air-Cooled

  • Gaggle Mentor
  • ****
  • Posts: 365
Re: New-to-me Stornello
« Reply #18 on: November 19, 2026, 03:23:41 PM »
These are the ones I ordered through Stein-Dinse.  Have not even put them on yet.




« Last Edit: November 19, 2026, 04:31:10 PM by Air-Cooled »
1973 Moto Guzzi V7 Sport, 2016 Moto Guzzi Stornello, 2023 Vespa Primavera, 2025 BMW R1300GS, 2027 Ducati Formula 73, 2023 Honda XR650L

 

Shop our affiliate storefront
Proceeds go back into the forum.
If you need to buy it anyway, use the affiliate link to help the forum.
Advertise Here