Author Topic: Parting Out My 2001 V11 Rosso Mandello (Read 12273 times)

mpwvp · « **on:** November 11, 2014, 09:24:03 PM »

I've been toying with the idea of parting out my 2001, I've done quite a bit work on it and I'm just a little afraid of having the engine rebuilt being that there so many things that could go wrong. for someone looking at possibly buying some parts from me, please feel free to PM me. I had a lot of things powder coated,clear coated along with some nice new heads that were completely overhauled by Mike Rich. I'm just not sure I have the time or the patience right now to put it all back together again. If you look up my profile you will see a lot of pictures of my bike.

If I have enough people that want some parts it will be worth it.

Thanks for taking a look.

-Marshall

mpwvp · « **Reply #1 on:** November 11, 2014, 10:57:39 PM »

Lots of powder coated parts including rims valve covers, sub frame, clear coated exhaust, fairing, alternator cover, HID head lamp conversation, new painted body parts, etc.

Sent from my iPhone using Tapatalk

Vasco DG · « **Reply #2 on:** November 12, 2014, 01:03:11 AM »

Shame to part out such a pretty bike. How much would you want for the entire jigsaw puzzle?

Pete

Late to the party · « **Reply #3 on:** November 24, 2014, 04:30:13 PM »

My thoughts and question as well.

Tony/CT · « **Reply #4 on:** November 24, 2014, 04:51:17 PM »

Ahh....don't part that bike out! Sell it as is! We need to keep our Guzzis on the road!

fotoguzzi · « **Reply #5 on:** November 24, 2014, 05:21:52 PM »

there is not that big a market and I'll predict you get less $ parting out even if you have to take around $3,500 for it.. I'm saying, where will you find buyers for parts like the tranny rear drive and motor? unless you'll sell each for just a few hundred I think it will be a hard sell.
tho not quite the same exclusiveness I have 98 EV parts left over cause they got no bids, like a complete fork w/triple trees, headlight ears, fender/fork brace axle that no one would buy for even $200.. 5 speed? no bids..timing cover? wiring harness?
finally sold the jugs/pistons and heads with rocker covers etc for around $300 after a couple ebay listings.. had to ship them to Sweden or somewhere far away.. I gave away many of the parts for free or real cheap and still have a bunch of parts all over.. need some headers? floorboards? tank, I have 3 EV airboxes.. a really nice EV camshaft w/40k looks great, same with crank (still in block) anyone? flywheel and used clutch?

so what is wrong with the Rosso as is?

Triple Jim · « **Reply #6 on:** November 24, 2014, 05:44:15 PM »

Quote from: mpwvp on November 11, 2014, 09:24:03 PM

...I'm just a little afraid of having the engine rebuilt being that there so many things that could go wrong.

Why does it need to be rebuilt?

Chuck in Indiana · « **Reply #7 on:** November 24, 2014, 06:14:29 PM »

Quote

need some headers?

Maybe.. I'll take a picture tomorrow.

mpwvp · « **Reply #8 on:** March 07, 2015, 03:10:26 PM »

After a busy and a long wait, I've decided to part out my 2001 Rosso Mondello. I'm moving to Austin Texas this June and just don't have the time or patience to repair the connecting rod. The rest of the bike is pretty much perfect. New Paint, lots of powder coating has been done. If your interested in parts feel free to message me. Also look at my profile if you want to see what color my body parts are.

Heads have just recently had a valve job done by Mike Rich and look fantastic. I only wished I was able to have them installed. They are still in the box and ready to ship. Also want to note that I'm selling all items in pairs, Heads,wheels,exhaust,valve covers and pork-chops.

I know I will get a lot crap for parting it out, I just don't want to deal with the headache of putting it all back together again. I have a ton of packing and business dealings to do before I leave. I'll hunt down another one when I get to Texas.

Have a great weekend everyone !!

Aloha,

Marshall

mpwvp · « **Reply #9 on:** March 07, 2015, 03:22:33 PM »

couple of pics

http://i129.photobucket.com/albums/p213/mpwvp808/phonepicsmarch020_zps143d9622.jpg
<a href="http://s129.photobucket.com/user/mpwvp808/media/phonepicsmarch020_zps143d9622.jpg.html" target="_blank"><img src="http://i129.photobucket.com/albums/p213/mpwvp808/phonepicsmarch020_zps143d9622.jpg" border="0" alt=" photo phonepicsmarch020_z ps143d9622.jpg"/>[/url]

http://i129.photobucket.com/albums/p213/mpwvp808/image2_zps2fcdc19d.jpeg

http://i129.photobucket.com/albums/p213/mpwvp808/image_zpsdfa37dd3.jpeg
http://i129.photobucket.com/albums/p213/mpwvp808/feb2014upload015_zps67c18b53.jpg
http://i129.photobucket.com/albums/p213/mpwvp808/image4_zps76540d54.jpeg

fotoguzzi · « **Reply #10 on:** March 07, 2015, 03:55:57 PM »

such a pretty thing!

mpwvp · « **Reply #11 on:** March 07, 2015, 04:14:52 PM »

Quote from: fotoguzzi on March 07, 2015, 03:55:57 PM

such a pretty thing!

Thanks Buddy, Its a bummer that I couldn't get it back together. I'll build another one later.

dilligaf · « **Reply #12 on:** March 07, 2015, 04:24:06 PM »

Love to have that but, "can't save them all". :BEER:
Matt

redrider · « **Reply #13 on:** March 07, 2015, 05:37:04 PM »

PM sent. Joe

mpwvp · « **Reply #14 on:** March 10, 2015, 12:26:02 PM »

Hi Joe, I sent you the pictures this morning. sorry for the delay.

Aloha,

Marshall

rocker59 · « **Reply #15 on:** March 10, 2015, 12:33:35 PM »

merged with your previous thread from back in the fall.

mpwvp · « **Reply #16 on:** March 10, 2015, 12:38:23 PM »

Thank you for the merge,

Aloha,

Marshall

mpwvp · « **Reply #17 on:** March 14, 2015, 04:53:22 PM »

Wanted to add being that I'm gotten quite a few inquiries about my heads that were rebuilt from Mike Rich. The heads were rebuilt to stock standards, but with stainless steel valves, and with higher quality valve guides.

Thank you for everyone's inquires.

Aloha.

Sent from my iPhone using Tapatalk

Chuck in Indiana · « **Reply #18 on:** March 14, 2015, 04:58:31 PM »

Quote from: mpwvp on March 14, 2015, 04:53:22 PM

Wanted to add being that I'm gotten quite a few inquiries about my heads that were rebuilt from Mike Rich. The heads were rebuilt to stock standards, but with stainless steel valves, and with higher quality valve guides.

Thank you for everyone's inquires.

Aloha.

Sent from my iPhone using Tapatalk

I know a guy that's looking for a good 6 speed..

Seagondollar · « **Reply #19 on:** March 14, 2015, 05:41:58 PM »

What would you want for the front end - the forks & triple clamps?

mpwvp · « **Reply #20 on:** March 14, 2015, 05:50:41 PM »

Trans is perfect, I didn't have any problems with it at all. I'm not sure on a fair price to sell it for? He can PM if he wants to make me a offer.

Thank you Chuck,

Aloha,

Marshall

mpwvp · « **Reply #21 on:** March 14, 2015, 05:52:54 PM »

Quote from: Seagondollar on March 14, 2015, 05:41:58 PM

What would you want for the front end - the forks & triple clamps?

Feel free to make me offer via PM. The forks are in good shape along with the triple clamps, however the the cosmos could use a nice coat of paint, being they are black a bit faded.

Aloha,

Marshall

earemike · « **Reply #22 on:** March 15, 2015, 02:44:58 AM »

OMG Rosso Mandello...

don't do it!

If you were down under I'd try and get the whole bike of you...

bikeseamus · « **Reply #23 on:** March 15, 2015, 08:21:57 AM »

Hi
I am Chuck Stottlemyer's friend in Indiana.JiM Connors My 2000 V11 transmission is garbage, of course...as they all were... and it is the big problem with riding it..... Chuck sent me your post, and I am interested in buying your transmission.... 317 789 8997 is my phone number, and bikeseamus68@hotmail.com is my email address.
I am delighted to find one and look forward to your reply...thanks, Jim

Chuck in Indiana · « **Reply #24 on:** March 15, 2015, 11:00:43 AM »

Quote

...as they all were...

We'll have to agree to disagree on that one.. ;D

Guzzistajohn · « **Reply #25 on:** March 15, 2015, 11:38:15 AM »

Seems a shame, I was just about to go give the old '83 LeMans a good run!

blackcat · « **Reply #26 on:** March 15, 2015, 12:29:56 PM »

If you start breaking down the engine, I'd be interested in the oil pump for the Daytona.

mpwvp · « **Reply #27 on:** March 17, 2015, 12:30:41 PM »

Quote from: earemike on March 15, 2015, 02:44:58 AM

OMG Rosso Mandello...

don't do it!

If you were down under I'd try and get the whole bike of you...

Trust me, I don't really want to especially since I've done all that powder coating and paint. Wish I could send it to you, but you probably can buy a new one with the costs of shipping.

mpwvp · « **Reply #28 on:** March 19, 2015, 11:44:07 AM »

My apologies if I have not gotten back to any of you on the parts that you are inquiring about, sometimes I get email alerts and sometimes I don't. So I'll be doing my best to check on the PM's and posts though out the day.

Have a great day

Aloha,

Marshall

mpwvp · « **Reply #29 on:** July 11, 2015, 09:45:18 AM »

I recently relocated to Austin Texas, I also brought my Rosso with me. If you were interested in buying any bike parts, please let me know. The shipping costs will be substantially less now that I am in Texas and not Hawaii. Please PM me if you have any questions.

Aloha,

Marshall

News:

Author Topic: Parting Out My 2001 V11 Rosso Mandello (Read 12273 times)

mpwvp

mpwvp

Vasco DG

mpwvp

mpwvp

mpwvp

dilligaf

redrider

mpwvp

mpwvp

mpwvp

mpwvp

mpwvp

mpwvp

mpwvp

mpwvp