Author Topic: Which Cylinder is Closest To Front?  (Read 2372 times)

Online SmithSwede

  • Guzzi Hero
  • *****
  • *
  • *
  • Posts: 1167
  • I don't want a pickle
Which Cylinder is Closest To Front?
« on: March 07, 2015, 06:42:24 PM »
On a 13 Guzzi Stone.  I don't think the con rods share a bearing, so they must be positioned side by side.  So one cylinder must be slightly in front of the other.  OK, so which cylinder is positioned closest to the front wheel?  I can't eyeball it.

Is this arrangement true for all Guzzis throughout history, or does it vary somehow?

Seemed like this was more obvious on my BMW airhead.  Or maybe I'm just going blind. 
Accentuate the positive;
Eliminate the negative;
Latch on to the affirmative;
Don't mess with Mister In-Between.

Online Antietam Classic Cycle

  • Guzzi Hero
  • *****
  • *
  • *
  • Posts: 9726
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: Which Cylinder is Closest To Front?
« Reply #1 on: March 07, 2015, 06:45:40 PM »
As you sit astride the bike, facing forward, the right cylinder will be slightly farther forward than the left.
Charlie
http://www.AntietamClassicCycle.com
'69 V700
'69 Ambassador
'76 Convert
'13 V7 Stone

Most used word in my vocabulary lately: "whatever", usually delivered with all of the disdain of an aging Valley Girl...


dilligaf

  • Guest
Re: Which Cylinder is Closest To Front?
« Reply #2 on: March 07, 2015, 06:51:37 PM »
OH!  Facing forward.  Got it.  :BEER:
Matt

Offline Joliet Jim

  • Guzzi Hero
  • *****
  • Posts: 5729
  • Justus Esto, Et Non Metue
Re: Which Cylinder is Closest To Front?
« Reply #3 on: March 07, 2015, 06:59:59 PM »
i always thought my one leg was shorter, explains alot :)
1975 T160 Triumph Trident "Spot"
2002 Cali Stone "Moby Dick"
1998 Centauro "Psycho Chicken"
2003 Buell Blast "Pegasus"

Online John A

  • Guzzi Hero
  • *****
  • *
  • Posts: 2790
  • No way to slow down...
  • Location: Hager city ,western WI
Re: Which Cylinder is Closest To Front?
« Reply #4 on: March 07, 2015, 08:33:01 PM »
The cylinders are numbered front to back, #1 is on the right, #2 is on the left. It would be opposite if they were numbered left to right.
John
MGNOC L-471

If you know something I really don't know, it will challenge something I presume

Offline charlie b

  • Guzzi Hero
  • *****
  • *
  • Posts: 6944
Re: Which Cylinder is Closest To Front?
« Reply #5 on: March 07, 2015, 08:34:25 PM »
LOL, yeah, riding along and I can feel the left cyl 'tapping' my knee.  Then realize I can't feel the right cyl.  I must be sitting crooked!  Then the light comes on.
1984 850 T5 (sold)
2009 Dodge Cummins 2500

Offline leafman60

  • Guzzi Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 6910
Re: Which Cylinder is Closest To Front?
« Reply #6 on: March 07, 2015, 09:10:31 PM »
On a 13 Guzzi Stone.  I don't think the con rods share a bearing, so they must be positioned side by side.  So one cylinder must be slightly in front of the other.  OK, so which cylinder is positioned closest to the front wheel?  I can't eyeball it.

Is this arrangement true for all Guzzis throughout history, or does it vary somehow?

Seemed like this was more obvious on my BMW airhead.  Or maybe I'm just going blind.  


As has already been stated, the rider's right cylinder is offset further forward.

Yes, this is more obvious on the BMW boxer engines.

The BMW crankshaft has 180 degree staggered crankpins for the connecting rods. The Guzzi crankshaft has a single pin onto which both connecting rods fit, side by side.  The separate crankpins on the BMW crankshaft position the connecting rods further apart (and the cylinders) than does the single pin crankshaft of the Guzzi.

Getting more technical, the BMW arrangement creates more "rocking coupling" imbalance than does the Guzzi. If Guzzi had knife-and-fork connecting rods like the Harley Big Twin, the rocking coupling effect would be eliminated and the cylinders would not be offset.
« Last Edit: March 07, 2015, 09:11:16 PM by leafman60 »

Online mtiberio

  • Guzzi Hero
  • *****
  • Posts: 3964
    • TiberioRacing
Re: Which Cylinder is Closest To Front?
« Reply #7 on: March 07, 2015, 09:12:22 PM »
Guzzi rods share a crankpin/journal/half the bearing. They touch one another side by side. In BMWs, each rod has its own crank throw, and a resulting larger (than Guzzi) offset front to rear.

Offline Cam3512

  • Guzzi Hero
  • *****
  • *
  • *
  • Posts: 5545
Re: Which Cylinder is Closest To Front?
« Reply #8 on: March 08, 2015, 06:55:40 AM »
All I know is it's easier to stretch my legs on my Guzzi.  Keep banging my ankles on the airhead.

Hope this isn't too technical...
Cam - NJ Rep MGNOC
'67 Stornello Scrambler
'71 Ambo Police
'74 V7 Sport
20 V85TT

http://mgnocnj.forumotion.com

Offline sib

  • Guzzi Hero
  • *****
  • Posts: 1600
  • Location: Smallest state, 221 times smaller than Texas, often compared to the size of an oil slick, forest fire, or ice sheet
Re: Which Cylinder is Closest To Front?
« Reply #9 on: March 08, 2015, 08:23:42 AM »
Yes, the difference is only about 1/2 inch (on my '13 V7 Stone), not enough to notice unless you know, then it seems like too much.
Current: 2016 V7II Stone
Previous: 2013 V7 Stone
Several decades ago: 1962? Honda CB77 Super Hawk

Online Wayne Orwig

  • Guzzi Hero
  • *****
  • Posts: 12669
    • Hog Mountain weather
  • Location: Hog Mountain
Re: Which Cylinder is Closest To Front?
« Reply #10 on: March 08, 2015, 08:41:50 AM »
Destra
Scientist have discovered that people will believe anything, if you first say "Scientist have discovered...."

Online mtiberio

  • Guzzi Hero
  • *****
  • Posts: 3964
    • TiberioRacing
Re: Which Cylinder is Closest To Front?
« Reply #11 on: March 08, 2015, 05:30:58 PM »
On big blocks that have distributors, you can see the factory put them behind the more forward cylinder

 

20 Ounce Stainless Steel Double Insulated Tumbler with donation credit
Buy a quality tumbler and support the forum at the same time!
Better than a YETI! BPA and Lead free.
Advertise Here