Author Topic: CalVin Plug Gap?  (Read 398 times)

Wry

  • Guest
CalVin Plug Gap?
« on: July 07, 2016, 04:43:42 PM »
What is the optimal spark plug gap for a 2008 Cal Vin?  Sorry if this is redundant.  Can't find the thread.

Offline CalVin2007

  • fickle old fool
  • Guzzi Hero
  • *****
  • Posts: 751
  • Location: Central Kansas,USA
Re: CalVin Plug Gap?
« Reply #1 on: July 07, 2016, 05:06:48 PM »
 .6-.7 mm  (.024"-.028") is the factory recommendation. I run mine at the top end of that spec with good results. That's the outer plugs...no spec given for the inners but they are a special construction plug and gap isn't supposed to be adjustable.

   Terry
'07 CalVin
 '79 TT500
 '78 SR500
 '80 SR500

Wry

  • Guest
Re: CalVin Plug Gap?
« Reply #2 on: July 07, 2016, 05:12:49 PM »
Thanks, Terry.

Wry

  • Guest
Re: CalVin Plug Gap?
« Reply #3 on: July 07, 2016, 09:44:26 PM »
It's good I asked.  One of the plugs was .1 mm off target.  Thanks again, Terry.

 


Advertise your products today. All proceeds go back into this website.
Your ad will show up over 10,000 times daily!
Advertise Here