Author Topic: what size is the nut on a ev camshaft? (Read 2260 times)

troyhamilton · « **on:** April 04, 2017, 04:29:51 PM »

a 27mm is sloppy and i have nothing that will fit it. now im going to make a trip into town to get one, once i know what size fits it!

Triple Jim · « **Reply #1 on:** April 04, 2017, 04:37:34 PM »

Until someone comes along who knows... do you have a caliper handy?

troyhamilton · « **Reply #2 on:** April 04, 2017, 04:49:34 PM »

no i sure dont. its a thing i need. i went through every wrench and socket i had.

troyhamilton · « **Reply #3 on:** April 04, 2017, 05:07:07 PM »

this is what i found
http://www.thisoldtractor.com/guzzitech.dk/gb_en_complex-technical_engine-strip.htm

but its sloppy not a sqaure fit. has anyone else encountered this?

troyhamilton · « **Reply #4 on:** April 04, 2017, 06:12:43 PM »

:drool:got her loose...

Triple Jim · « **Reply #5 on:** April 04, 2017, 06:30:31 PM »

Good, now you can take the nut to the tool store. :)

fotoguzzi · « **Reply #6 on:** April 04, 2017, 06:38:07 PM »

I just checked one of those nuts in my garage.. yep, 27mm but mine was a little sloppy too.. I don't think it will be a problem with that little slop use a rattle gun..

troyhamilton · « **Reply #7 on:** April 04, 2017, 06:48:16 PM »

yeah im good. i wish i could change it to a tach but it is all good, i aint racing. yet...lol

rodekyll · « **Reply #8 on:** April 04, 2017, 07:34:48 PM »

I was going to suggest the nut is a 46 long, but 27 mm is more accurate.

Ncdan · « **Reply #9 on:** April 04, 2017, 08:07:30 PM »

A 6 point heavy socket would be my choice when a socket is a little loose.

troyhamilton · « **Reply #10 on:** April 04, 2017, 08:43:16 PM »

thats what i used. i have a tool fetish. always something i need or want lol

ejs · « **Reply #11 on:** April 05, 2017, 09:40:13 AM »

The partslist states 18mm nut for camshaft.
Crankshaft has 25mm nut.

fotoguzzi · « **Reply #12 on:** April 05, 2017, 09:46:23 AM »

Quote from: ejs on April 05, 2017, 09:40:13 AM

The partslist states 18mm nut for camshaft.
Crankshaft has 25mm nut.

is that a small block? all the 1100 motors I've seen had 32mm crank nut.

Tom H · « **Reply #13 on:** April 05, 2017, 11:06:21 AM »

Quote from: ejs on April 05, 2017, 09:40:13 AM

The partslist states 18mm nut for camshaft.
Crankshaft has 25mm nut.

That is the shaft size, not the size for a socket.

Tom

ejs · « **Reply #14 on:** April 05, 2017, 12:31:05 PM »

Socket size for camshaft nut is 26 mm.

troyhamilton · « **Reply #15 on:** April 05, 2017, 01:57:10 PM »

i got no 26...dont think it exists

fotoguzzi · « **Reply #16 on:** April 05, 2017, 02:08:01 PM »

Well my 26 mm did not fit, on 2different cam nuts I had in my hand last night, they were 27mm

pat80flh · « **Reply #17 on:** April 05, 2017, 05:09:43 PM »

1 1/16 ?

5154guzzi · « **Reply #18 on:** April 05, 2017, 05:45:02 PM »

The 1 1/16 is a nice fit, and the one I reach for for this job.

troyhamilton · « **Reply #19 on:** April 05, 2017, 07:03:00 PM »

Quote from: fotoguzzi on April 05, 2017, 02:08:01 PM

Well my 26 mm did not fit, on 2different cam nuts I had in my hand last night, they were 27mm

yep we took the nut to a freind that had one definatly not 26. ill be able to get it with the 27. my freind thinks its a 26.5 to be precise

News:

Author Topic: what size is the nut on a ev camshaft? (Read 2260 times)