Author Topic: Adjusting the swing arm on 1998 EV (Read 1063 times)

rtbain · « **on:** April 13, 2017, 02:31:37 PM »

I removed the swing arm on the 1998 EV 11. After careful reading of the service manual found no reference about tightening the swing arm on installation.

They are tapered roller bearings. Just snug them up until all play is removed?

Chuck in Indiana · « **Reply #1 on:** April 13, 2017, 02:59:54 PM »

Quote from: rtbain on April 13, 2017, 02:31:37 PM

I removed the swing arm on the 1998 EV 11. After careful reading of the service manual found no reference about tightening the swing arm on installation.

They are tapered roller bearings. Just snug them up until all play is removed?

Yeah. Pretend they are steering head bearings. Measure the threads that stick out on both sides to be the same.

rtbain · « **Reply #2 on:** April 13, 2017, 04:19:41 PM »

Quote from: Chuck in Indiana on April 13, 2017, 02:59:54 PM

Yeah. Pretend they are steering head bearings. Measure the threads that stick out on both sides to be the same.

Kinda thought so but its better to ask. Thanks!

sidecarnutz · « **Reply #3 on:** April 13, 2017, 04:25:19 PM »

Chuck is exactly right. It is that simple. Just count the threads if you don't have a caliper to measure depth.

Wildguzzi.com

News:

Author Topic: Adjusting the swing arm on 1998 EV (Read 1063 times)

rtbain

Adjusting the swing arm on 1998 EV

Chuck in Indiana

Re: Adjusting the swing arm on 1998 EV

rtbain

Re: Adjusting the swing arm on 1998 EV

sidecarnutz

Re: Adjusting the swing arm on 1998 EV