V11 EV delinking brakes and brake light.

[Edgo897]

The brake distributor activates the brake light, right? Now that's the distributor is gone what's a good switch to use and whats the best way to hook it up? I have the lines all set up. Will bleed it this weekend.

Thanks, Ed

[rodekyll]

There are pressure switches that are integrated with banjo bolts.  Get one of those and put it on a handy banjo joint.  Extend wires from the old brake switch wires as needed or splice into the other brake switch wires -- whichever is handier.  Do this before you bleed the brakes.

[Antietam Classic Cycle]

Depending on the thread pitch:
http://www.mgcycle.com/index.php?main_page=product_info&cPath=110_146&products_id=1583
http://www.mgcycle.com/index.php?main_page=product_info&cPath=110_146&products_id=1584

[Edgo897]

How cool. Found one on eBay for $7.
Thanks

[Orange Guzzi]

You will need to replace both the front and rear master cylinders.  Get master cylinders that have the brake switch included. 

[Edgo897]

You will need to replace both the front and rear master cylinders.  Get master cylinders that have the brake switch included.

I got a used front MC from a big Kawi that had dual disks up front. It's huge. It should be fine. Leaving the stock rear MC for now. I rarely use the rear brake. I bled them today. Didn't ride but they pumped up tight.
Thanks