Author Topic: V7 III Anniversario Owner/Dealer Accessory Fitmint Question.  (Read 5415 times)

Offline Guzzi Gal

  • MOTO GUZZI~Because your heart is in the bike, and the bike is in your heart. ~Huzo~
  • Gaggle Hero
  • *****
  • Posts: 1686
    • Sonoran Sunriders, YouTube
  • Location: Phoenix, AZ.
V7 III Anniversario Owner/Dealer Accessory Fitmint Question.
« on: December 08, 2017, 11:52:00 AM »
 :weiner: I would like to put a luggage rack on Anni (also considering H&B twinlights, and MG engine guards), but there are some issues.  It seems that Moto Guzzi didn't intend the Anniversario to be functional, beyond riding.  The Guzzi racks won't work because of "incompatibilities with the rear fender", or so I've been told by AF1 Racing and Moto International.  MI says the small rack (model #2S000256, not available in chrome, and only rated for 7 lbs.!?!) "might" work, but AF1 says no deal.  What I want is MG's larger chrome rack (model # 2S001007), and not the ugly, spindly looking Hepco & Becker rack, which may or may not work.  When you look at the differences between the bikes, the only thing I see is the taillight assembly.  The Anni's has its own mounting bracket, where the Special's is affixed directly to the fender.

If you've added a rack, which one did you get, and did you have to do modifications?  I'm tired of having my tailbag on my curved leather seat, and not on a firm flat surface.         



:bow: Thanks for enabling my MG obsession! :bow:
"Anni" '17 Moto Guzzi V7 III Anniversario #220/1000,
"Velvet" '16 Honda CTX 700,
"Brigitte", AKA "Gigi" '13 Vespa GTS 300ie,
"Grey Wind" '12 Vespa GTS 300 Super,  
The twin '16 Honda Metropolitans
"Miri" and Mori"

Offline rider33

  • Gosling
  • ***
  • Posts: 223
  • Location: the wilds of western Wisconsin
Re: V7 III Anniversario Owner/Dealer Accessory Fitmint Question.
« Reply #1 on: December 08, 2017, 12:19:58 PM »
I had a rear rack on my Bonneville which I carried everything from a Pelican box to a large Aerostich seat bag, 'very handy.  Tho an OEM item, I never really did like the look of the thing.  On Lucia (the new Anniversario), I just can't bring myself to add one, it's just too pretty.  MG does not appear to be fleet of foot on aftermarket bits (my center stand for instance is back ordered to Italy, likely they are mining the ore right now) and this is still a relatively new model so it may be the proper bit is still in process, I'd keep checking.  A good tank bag might work in the interim and sort of fits the ethos of the bike as well.
"some journeys continue long after movement in time and space has ceased"  -Steinbeck

Offline JeffOlson

  • Gaggle Hero
  • *****
  • Posts: 1643
  • Location: Oregon & Washington
Re: V7 III Anniversario Owner/Dealer Accessory Fitmint Question.
« Reply #2 on: December 08, 2017, 12:21:22 PM »
I love your bike! If I could have another Moto Guzzi, that would be the one.

If it were mine, I would replace the bulbous taillight assembly with something more streamlined. Check out the various "tidy tail"  or "fender eliminator" kits. They may have the parts you need. Once that is done, you should be able to install a rack.

I would not want to lose my rear fender, but this is the idea:



I don't know if this would fit, but AF1 Racing does offer a fender eliminator kit (https://www.af1racing.com/store/Scripts/prodView.asp?idproduct=78411&sku=MB-V7-01SL-RED&description=MotoboxUSA+Fender+Eliminator%2FTaillight++%2DRED). Consequently, they might be able to tell you if you could use parts from it and still retain your rear fender, and then install the rack you want to install.

In fact, I would contact MotoBox directly and tell them what you are interested in: https://motoboxusa.net
« Last Edit: December 08, 2017, 12:39:39 PM by JeffOlson »
2018 Vespa GTS 300
2016 Moto Guzzi Norge
2015 Vespa Sprint 150
2015 Vespa GTS 300

Offline Sheepdog

  • Gaggle Hero
  • *****
  • Posts: 5575
  • 2007 Moto Guzzi California Vintage
  • Location: Waldheim, Louisiana. USA
Re: V7 III Anniversario Owner/Dealer Accessory Fitmint Question.
« Reply #3 on: December 08, 2017, 02:02:19 PM »
There are a number of excellent luggage choices on the Moto Machines website (aka Hepco Becker USA) for the v7III. Their black luggage rack is strong and unobtrusive and the C-Bow carriers/and panniers are perfect for a bike like the V7. Check out the links below...

https://www.motomachines.com/V7III_c_882-2.html
https://www.motomachines.com/C-Bow-Bags_c_29.html
"Change is inevitable. Growth is optional." John C. Maxwell

Offline twowheeladdict

  • Gaggle Hero
  • *****
  • Posts: 6550
Re: V7 III Anniversario Owner/Dealer Accessory Fitmint Question.
« Reply #4 on: December 08, 2017, 03:00:33 PM »
I love your bike! If I could have another Moto Guzzi, that would be the one.

If it were mine, I would replace the bulbous taillight assembly with something more streamlined. Check out the various "tidy tail"  or "fender eliminator" kits. They may have the parts you need. Once that is done, you should be able to install a rack.

I would not want to lose my rear fender, but this is the idea:



I don't know if this would fit, but AF1 Racing does offer a fender eliminator kit (https://www.af1racing.com/store/Scripts/prodView.asp?idproduct=78411&sku=MB-V7-01SL-RED&description=MotoboxUSA+Fender+Eliminator%2FTaillight++%2DRED). Consequently, they might be able to tell you if you could use parts from it and still retain your rear fender, and then install the rack you want to install.

In fact, I would contact MotoBox directly and tell them what you are interested in: https://motoboxusa.net

That looks like a rear ending just waiting to happen.  Looks good parked in front of the coffee shop though.  I always add more lighting to my bikes instead of less.

My '15 FZ-07
2022 Moto Guzzi V85TT Guardia D'onore
2018 V7 III Carbon Dark #0009 of 1921
2018 Road Glide Special
2021 Kawasaki KLX300SM
2017 Suzuki Van Van 200
2015 Yamaha SR400
2009 Harley Davidson Softail Custom

Offline twowheeladdict

  • Gaggle Hero
  • *****
  • Posts: 6550
Re: V7 III Anniversario Owner/Dealer Accessory Fitmint Question.
« Reply #5 on: December 08, 2017, 03:05:04 PM »
Guzzi Gal,

I was in the nearest dealer looking at their latest Moto Guzzi offerings.  I didn't realize that not all V7 accessories fit on all V7s.  I am going to have to do some more research before I decide to make a move.

I really wanted to like the Stornello, but the bike just looks like it was designed for the low exhaust and seems like something is missing with the scrambler exhaust on it.

They have a beautiful V7III black special that looks tastefully done. 

I might wait for the '18 V7 Carbon unless this dealer comes off on their prices.

Now, I have to research what accessories I might want and make sure the different bikes can take them.
2022 Moto Guzzi V85TT Guardia D'onore
2018 V7 III Carbon Dark #0009 of 1921
2018 Road Glide Special
2021 Kawasaki KLX300SM
2017 Suzuki Van Van 200
2015 Yamaha SR400
2009 Harley Davidson Softail Custom

Offline kingoffleece

  • SplitWeight(tm) seat covers
  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 4372
  • Rated 5 STARS Motorcycle Consumer News
  • Location: Valley of the Sun
Re: V7 III Anniversario Owner/Dealer Accessory Fitmint Question.
« Reply #6 on: December 08, 2017, 03:32:10 PM »
I put a Ventura system on my V7.  To me it's the perfect solution.  The brackets look very keen and you can swap rear racks in a second to fit what you need.

To each their own but the C bow looks a bit tart when the bags are not installed and that's a deal breaker IMHO,  and yes, I know I'm in the minority there.  Your bike is so wonderful to look at the thought of hanging anything off the side is to horrifying to contemplate.  Completely kills the line of the bike-no offence intended-just one man's opinion.

The Ventura rack sits just like a rack should and the small and/or large bags can be swapped out in a second or left off and it still looks a treat.

As always, YMMV.
SplitWeight(tm) seat covers. A King of Fleece LLC product.

Offline Guzzi Gal

  • MOTO GUZZI~Because your heart is in the bike, and the bike is in your heart. ~Huzo~
  • Gaggle Hero
  • *****
  • Posts: 1686
    • Sonoran Sunriders, YouTube
  • Location: Phoenix, AZ.
Re: V7 III Anniversario Owner/Dealer Accessory Fitmint Question.
« Reply #7 on: December 08, 2017, 03:55:11 PM »
I'm looking at only for a rear luggage rack, preferably one prettier than the H&B ( yuck )  I had a thread about side luggage a while back, and decided that the only panniers that would fit the look of the bike would be old school leather or canvas.  Nothing modern/plastic/square would look good.  That said, this tailbag is silver, even if it is modern, so it doesn't clash too much, and it fits my helmet.  I do have the matching side bags, but wouldn't think of leaving them on Anni, but they do give me options in a pinch.
« Last Edit: December 08, 2017, 07:07:38 PM by Guzzi Gal »
:bow: Thanks for enabling my MG obsession! :bow:
"Anni" '17 Moto Guzzi V7 III Anniversario #220/1000,
"Velvet" '16 Honda CTX 700,
"Brigitte", AKA "Gigi" '13 Vespa GTS 300ie,
"Grey Wind" '12 Vespa GTS 300 Super,  
The twin '16 Honda Metropolitans
"Miri" and Mori"

Offline JeffOlson

  • Gaggle Hero
  • *****
  • Posts: 1643
  • Location: Oregon & Washington
Re: V7 III Anniversario Owner/Dealer Accessory Fitmint Question.
« Reply #8 on: December 08, 2017, 04:52:55 PM »
I�m looking at only for a rear luggage rack, preferably one prettier than the H&B ( yuck )  I had a thread about side luggage a while back, and decided that the only panniers that would fit the look of the bike would be old school leather or canvas.  Nothing modern/plastic/square would look good.  That said, this tailbag is silver, even if it is modern, so it doesn�t clash too much, and it fits my helmet.  I do have the matching side bags, but wouldn�t think of leaving them on Anni, but they do give me options in a pinch.

Although saddle bags/side cases/panniers look better to me than a top case, I find a top case is far more useful. (I keep taking the top case off my Norge because it looks better without, and I always put it back on because it is so much handier than the fiddly, leaky panniers.)

If you could put a rack on your Anni, you could then attach a removable, hard, waterproof, locking top case that could hold your helmet and other important items while you are out and about.
2018 Vespa GTS 300
2016 Moto Guzzi Norge
2015 Vespa Sprint 150
2015 Vespa GTS 300

Offline Attackpug

  • Hatchling
  • **
  • Posts: 61
  • Location: Albuquerque NM
Re: V7 III Anniversario Owner/Dealer Accessory Fitmint Question.
« Reply #9 on: December 08, 2017, 05:03:23 PM »
Im in the same boat I dont want to mess up Annie's looks but need a better rack for carrying stuff. Maybe some leather bags is the solution.
2016 BMW R 1200 RT
2017 Moto Guzzi V7 III Anniversario #149 My baby!

Offline Guzzi Gal

  • MOTO GUZZI~Because your heart is in the bike, and the bike is in your heart. ~Huzo~
  • Gaggle Hero
  • *****
  • Posts: 1686
    • Sonoran Sunriders, YouTube
  • Location: Phoenix, AZ.
Re: V7 III Anniversario Owner/Dealer Accessory Fitmint Question.
« Reply #10 on: December 08, 2017, 07:10:27 PM »
Im in the same boat I dont want to mess up Annie's looks but need a better rack for carrying stuff. Maybe some leather bags is the solution.

Here's the link to my previous luggage inquiry.  Maybe something here will fit your needs?
http://wildguzzi.com/forum/index.php?topic=92050.0
:bow: Thanks for enabling my MG obsession! :bow:
"Anni" '17 Moto Guzzi V7 III Anniversario #220/1000,
"Velvet" '16 Honda CTX 700,
"Brigitte", AKA "Gigi" '13 Vespa GTS 300ie,
"Grey Wind" '12 Vespa GTS 300 Super,  
The twin '16 Honda Metropolitans
"Miri" and Mori"

jlburgess

  • Guest
Re: V7 III Anniversario Owner/Dealer Accessory Fitmint Question.
« Reply #11 on: December 08, 2017, 08:27:53 PM »
IMHO this is the greatest universal fit luggage system of all time.  The saddlebags work well, hold their shape when empty, and the duffel bag on top clamps on to make plenty of room for camping if you don't have a passenger.  I have had this for about 10 years and it has always fit on any bike that I owned.  :thumb:

http://www.motorcyclegear.com/browse/view_product_images/6349
« Last Edit: December 08, 2017, 08:29:48 PM by jlburgess »

twowings

  • Guest
Re: V7 III Anniversario Owner/Dealer Accessory Fitmint Question.
« Reply #12 on: December 08, 2017, 09:35:57 PM »
I've been very happy with Mosko Moto rackless products on my Norge...

www.moskomotogear.c om
« Last Edit: December 09, 2017, 03:31:59 PM by twowings »

Offline rider33

  • Gosling
  • ***
  • Posts: 223
  • Location: the wilds of western Wisconsin
Re: V7 III Anniversario Owner/Dealer Accessory Fitmint Question.
« Reply #13 on: December 09, 2017, 02:04:42 PM »
I put a Ventura system on my V7.  To me it's the perfect solution.  The brackets look very keen and you can swap rear racks in a second to fit what you need.

To each their own but the C bow looks a bit tart when the bags are not installed and that's a deal breaker IMHO,  and yes, I know I'm in the minority there.  Your bike is so wonderful to look at the thought of hanging anything off the side is to horrifying to contemplate.  Completely kills the line of the bike-no offence intended-just one man's opinion.

The Ventura rack sits just like a rack should and the small and/or large bags can be swapped out in a second or left off and it still looks a treat.

As always, YMMV.

I had those on my W650 but like a dolt, I sold them with the bike.  'Very flexible & when not in use
the rack comes off with two set screws as I recall.  I may need to look into those again.
"some journeys continue long after movement in time and space has ceased"  -Steinbeck

***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
Best quality vinyl available today. Easy application.
Advertise Here
 


NEW WILDGUZZI PRODUCT - Moto Guzzi Door Mat
Receive donation credit with door mat purchase!
Advertise Here