Front turn signals

[izzuG]

I'm looking for some front turn signals for my 74' Eldo, any suggestions?  Thanks, and Merry Christmas!

[Antietam Classic Cycle]

If you want to go with as close to original as possible, use these brackets:
http://www.mgcycle.com/index.php?main_page=product_info&cPath=37_156&products_id=2538
and mount either reproduction or genuine Lucas signals such as these:
https://www.ebay.com/itm/LUCAS-TURN-SIGNAL-SHORT-REAR-SET-54057553-60-4105-56605-TRIUMPH-BSA-NORTON/272355404371?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

The originals had just a short, hollow stud, not a long stem. You can fairly easily shorten the supplied stem, or go more original by removing the stem, tapping the body to 7/16-14, sourcing or making a hollow stud approx. 50 mm long, and 7/16-14 jam nuts.

But, with those brackets, there are lots of choices you can mount up. Repro vintage Harley signals are pretty nice:
https://www.jpcycles.com/product/310-007/v-twin-manufacturing-turn-signal-kit
You can wire them up as running lights as well.

Tons of other types, just depends on what you like.

[LeRoy]

With the addition of the proper brackets you could also mount the police-style Dietz turn signals (if that's your thing).

http://www.mgcycle.com/index.php?main_page=product_info&cPath=37_156&products_id=2538

[Shameless plug: I just so happen to have some of the original Dietz dual lens turn signals. <cough, cough> PM if interested. Like these, but new and less expensive:
https://www.ebay.com/itm/Dietz-6-75-Double-Faced-Sided-Light-Amber-Red-DZ-77-276-Turn-Stop-Park-Brake-2/323576778401?epid=1117815078&hash=item4b56adcea1:g:KokAAOSwSc1bsff8:rk:42:pf:0]