Author Topic: Tri-King Guzzi powered three wheeler  (Read 8686 times)

Offline Canuck750

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • Posts: 2166
  • Location: Edmonton, Canada
Tri-King Guzzi powered three wheeler
« on: August 12, 2026, 07:39:31 PM »
Moving this topic from the build section to general discussion

I have been away from the Wildguzzi family for quite a long time, had to deal with a bought of cancer two years ago, thankfully it’s behind me now. For the past year I have been building my forever home with a garage / shop that meets all my wish lists. As I get closer to completion of the build I am getting an itch to take on a new project.
I have been interested in the Tri-King three wheeler kits out of the United Kingdom for a long time.
I don't have a donor Guzzi yet, would like to find a low mile 1100 or 1200 Sport or similar to start with.

I have never seen one in the flesh let alone drove (ridden?) one.

Anyone ever driven one?
What are your thoughts on them?
If you have built one would you do it again?

I got started with Guzzis having never ridden one and bought my 72 Eldorado project sight unseen as a basket case and that has led to a love affair with the brand and many restorations over the years, I guess what I am saying is I don’t worry about taking the plunge on a Tri-King but it would be great to hear from someone who has even limited experience with them.

Thanks in advance

Jim
48 Guzzi Airone, 57 Guzzi Cardellino, 65 Benelli 200 sprite, 66 Aermacchi Sprint, 68 Gilera 106 SS, 72 Eldorado, 72 Benelli 180, 74 Guzzi 750S, 73 Laverda SF1, 74  Benelli 650S, 75 Ducati 860GT, 75 Moto Morini 3-1/2, 78 Moto Morinii 500

Offline Antietam Classic Cycle

  • Gaggle Hero
  • *****
  • *
  • Posts: 15224
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: Tri-King Guzzi powered three wheeler
« Reply #1 on: August 12, 2026, 08:07:02 PM »
My Facebook friend Patrick Roush in Burien, WA has an early one (chassis #17). I'm sure he could answer any questions you have.





I'd love to have one myself. Years ago a "barn fresh" one showed up at a Bikes & Breakfast event in Clifton, VA. I tracked down the owner and asked about buying it, but got the usual "I'm going to restore it one day" answer.  :undecided:
Charlie

Offline RinkRat II

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 2296
  • Lake Powell AZ
Re: Tri-King Guzzi powered three wheeler
« Reply #2 on: August 13, 2026, 11:31:52 AM »

    Glad your back Jim! Can't help you on the Tri King but am looking forward to this build when it goes through your capable hands.  Looking forward to seeing the new shop too! Congrats on the house.

   Paul B :boozing: :popcorn:
A Miller in the hand is worth two in the fridge.

Online TN Mark

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 1335
Re: Tri-King Guzzi powered three wheeler
« Reply #3 on: August 13, 2026, 12:33:23 PM »
Best news ever: the cancer is behind me now. Congratulations Jim.

I have nothing to offer on the trike kit as I have no experience with them.

Offline Don G

  • Gaggle Hero
  • *****
  • Posts: 1065
  • Location: Smiley, Saskatchewan Canada
Re: Tri-King Guzzi powered three wheeler
« Reply #4 on: August 13, 2026, 01:50:05 PM »
Jim: There was a fellow in Calgary about 10 years ago building Morgan replicas, I purchased all of the left over California parts that were not used in the builds. I do not have his contact info but you may be able to locate someone via Facebook etc. who may know of this dude.  DonG

Offline SemperVee

  • My life will be told in MC people and experiences more than anything else.
  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 1239
  • USMC Retired
  • Location: Seattle - ish
Re: Tri-King Guzzi powered three wheeler
« Reply #5 on: August 13, 2026, 02:20:02 PM »

    There are several 1100 Cali's for sale down here in Seattle WA, about 600 miles from you, Including my own low Mileage 1 owner pristine 03 EV Hydro from Moto Intl with warranty service records.  Good luck with your project.
 
56 years of Street Riding - All Brands
2007 MG Norge - VroomHilda
2003 Cali Hydro EV
2012 Victory CCT
2007 MG RED Norge
14 Harleys 2 VStrom 1000's
2005 BMW K1200LT, 81 R100RT, 73R/75/5

USMC Retired - Rider since 1973 - La Dolce Vita
Moto Guzzi - Making mechanics out of Riders since 1921

Offline Antietam Classic Cycle

  • Gaggle Hero
  • *****
  • *
  • Posts: 15224
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: Tri-King Guzzi powered three wheeler
« Reply #6 on: August 14, 2026, 08:30:35 AM »
The latest Triking uses a "CARC" drivetrain. http://www.type4.trikingsportscars.co.uk/
Charlie

Offline Canuck750

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • Posts: 2166
  • Location: Edmonton, Canada
Re: Tri-King Guzzi powered three wheeler
« Reply #7 on: August 16, 2026, 09:22:37 AM »
That’s good to know Charlie, thank you, I am keeping a lookout for a Griso or similar model, not in a rush and it may take awhile to find one in western Canada.
48 Guzzi Airone, 57 Guzzi Cardellino, 65 Benelli 200 sprite, 66 Aermacchi Sprint, 68 Gilera 106 SS, 72 Eldorado, 72 Benelli 180, 74 Guzzi 750S, 73 Laverda SF1, 74  Benelli 650S, 75 Ducati 860GT, 75 Moto Morini 3-1/2, 78 Moto Morinii 500

Offline Antietam Classic Cycle

  • Gaggle Hero
  • *****
  • *
  • Posts: 15224
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: Tri-King Guzzi powered three wheeler
« Reply #8 on: August 16, 2026, 10:32:37 AM »
That’s good to know Charlie, thank you, I am keeping a lookout for a Griso or similar model, not in a rush and it may take awhile to find one in western Canada.

Brevas and Norges seem to be the most common and least expensive. I prefer the 2V engine.

Triking was very helpful on the "1200 Ambassador" project I've built for a customer. There was no way I could have modified the Norge harness to work myself, so I sent it them and they did it. This was the first start, after I mocked it up. It's since been torn down and everything made pretty, just about finished. https://youtu.be/QynKxtPK01k?si=aIU_G5VCdbgvNCTV
Charlie

Offline AJ Huff

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 4271
  • Location: College Community IA
Re: Tri-King Guzzi powered three wheeler
« Reply #9 on: August 16, 2026, 11:02:31 AM »
I wasn't aware of this vehicle. I thought you were building a Guzzi based Road Glide-like trike. Wish Guzzi would . But looking forward to seeing your build!

-AJ
'71 Ambassador
'01 California Special
'05 Road King
MGNOC# L-753

Offline FlierMike

  • New Egg
  • *
  • Posts: 3
  • Building a replica 30's Morgan 3 Wheeler
  • Location: Vero Beach, FL
Re: Tri-King Guzzi powered three wheeler
« Reply #10 on: August 19, 2026, 05:05:46 PM »
Hello all,
I am building a Morgan Super Sports replica from the 1930's. I started building from scratch from a set of B.R.A. CX drawings and planned the whole thing using Honda GL500 power train and mono shock swing arm.

I really wanted a Moto Guzzi motor, but my budget did not allow that.

Through a friend I recently obtained a crashed MG GRiSO 1100 2V for towing and storage fees. Luckily, damage is to the left side with only the valve cover marked. The Dash was destroyed, but after talking to TriKing they are going to modify my wiring loom to allow the engine to be used  in a car, and re-flash the ECU for better torque and smoothness.


Mike Young
Retired Pilot, A&P Mechanic

Offline Antietam Classic Cycle

  • Gaggle Hero
  • *****
  • *
  • Posts: 15224
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: Tri-King Guzzi powered three wheeler
« Reply #11 on: August 19, 2026, 05:35:49 PM »
Hello all,
I am building a Morgan Super Sports replica from the 1930's. I started building from scratch from a set of B.R.A. CX drawings and planned the whole thing using Honda GL500 power train and mono shock swing arm.

I really wanted a Moto Guzzi motor, but my budget did not allow that.

Through a friend I recently obtained a crashed MG GRiSO 1100 2V for towing and storage fees. Luckily, damage is to the left side with only the valve cover marked. The Dash was destroyed, but after talking to TriKing they are going to modify my wiring loom to allow the engine to be used  in a car, and re-flash the ECU for better torque and smoothness.

Triking modified the Norge harness for the Ambassador project I'm working on. No dash necessary. I have two Beetle maps to choose from, thanks to Pete Roper, so I didn't have them reflash the ECU.

Moto Guzzi are a lot cheaper in the US - I bought an almost complete 2000 Jackal for $350 about 18 months ago. 
Charlie

Offline FlierMike

  • New Egg
  • *
  • Posts: 3
  • Building a replica 30's Morgan 3 Wheeler
  • Location: Vero Beach, FL
Re: Tri-King Guzzi powered three wheeler
« Reply #12 on: August 19, 2026, 06:22:42 PM »
Charlie,
Ref your comment about US prices, did you think I was elsewhere?

No disrespect, I sure Beetle does not deal with maps for increased weight operations. TriKing made it very clear that increasing torque helps counteract the increase in kerb weight. Smoothness increase is a bonus.
Mike Young
Retired Pilot, A&P Mechanic

Offline Antietam Classic Cycle

  • Gaggle Hero
  • *****
  • *
  • Posts: 15224
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: Tri-King Guzzi powered three wheeler
« Reply #13 on: August 19, 2026, 07:05:55 PM »
Charlie,
Ref your comment about US prices, did you think I was elsewhere?

No disrespect, I sure Beetle does not deal with maps for increased weight operations. TriKing made it very clear that increasing torque helps counteract the increase in kerb weight. Smoothness increase is a bonus.

Sorry, the B.R.A. CX is almost unheard of in the US (I had to Google it), and in the above quote you use the UK version of "curb". So I assumed...  :wink:
Charlie

Offline FlierMike

  • New Egg
  • *
  • Posts: 3
  • Building a replica 30's Morgan 3 Wheeler
  • Location: Vero Beach, FL
Re: Tri-King Guzzi powered three wheeler
« Reply #14 on: August 19, 2026, 09:33:56 PM »
Two Nations divided by a common language.

Mike Young
Retired Pilot, A&P Mechanic

Offline Brian in FL

  • New Egg
  • *
  • Posts: 13
  • Location: NE FL
Re: Tri-King Guzzi powered three wheeler
« Reply #15 on: November 10, 2026, 09:39:01 AM »
Hey Jim, how goes your Tri-King project?  Pull the trigger yet?  Any more info?  I've had that worm in my brain for a while.  Got the perfect donor bike, a 2001 CA Special that I can't bear to part with but don't ride often at all.  Wish I had a bigger garage, but If I do get the project I'd have to sell my VW single cab to make room  :sad:




« Last Edit: November 10, 2026, 09:40:14 AM by Brian in FL »

Offline Antietam Classic Cycle

  • Gaggle Hero
  • *****
  • *
  • Posts: 15224
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: Tri-King Guzzi powered three wheeler
« Reply #16 on: November 10, 2026, 10:12:10 AM »
No disrespect, I sure Beetle does not deal with maps for increased weight operations. TriKing made it very clear that increasing torque helps counteract the increase in kerb weight. Smoothness increase is a bonus.

The "1200 Ambassador" is now on the road with the (Beetle map) remapped ECU. I can't imagine how anyone could improve upon the torque output or smoothness. The thing is a monster! I haven't even gone past half throttle with it yet, it pulls so hard, in any gear from about any speed. Smoother than any Guzzi I've ever ridden. It is geared like an early Tonti Guzzi (7/33 rear drive), so I plan to swap on an 8/33 from an EV to "tame the beast" a bit. 
Charlie

Offline jdgretz

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • Posts: 1152
  • Proud Owner of a Red Norge
Re: Tri-King Guzzi powered three wheeler
« Reply #17 on: November 13, 2026, 01:40:47 AM »
A little late to this party, but...

A fellow Vietnam Helicopter Pilot here in SoCal owns one and has brought it to a couple of our meetings.  Man, is it tight!  Hard for 6' me to get in and out of and there is not much shoulder room for two regular sized folks.  On the other hand, it took a week for the silly to be wiped off my face after riding and driving it around the airfield.  If I had stupid money available, I might just put one together.  For me it was more fun than the Slingshot, although the Slingshot was much more comfortable.

jdg
2007 Norge Sophia The Fast Red One
1999 Honda Helix - Zippy
2008 Honda Goldwing


Offline Moparnut72

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 3388
  • Location: Quincy California
Re: Tri-King Guzzi powered three wheeler
« Reply #18 on: November 13, 2026, 07:16:04 AM »
A friend in Reno has one. The last I knew he was working on some improvements. He got it from a couple who had two of them, the other was Harley powered, a Twin Cam if I remember correctly.
kk
Mopar or Nocar
Current Bike:
2026 Triumph T120
1976 T3 disaster

Taking new riders for a spin:
2023 V100 Navale
2019 V7lll Special
2016 Audace
MGNOC #24053
Amiga computer shop owner: "Americans are great consumers but terrible shoppers".

Offline Antietam Classic Cycle

  • Gaggle Hero
  • *****
  • *
  • Posts: 15224
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: Tri-King Guzzi powered three wheeler
« Reply #19 on: November 13, 2026, 08:20:51 AM »
A little late to this party, but...

A fellow Vietnam Helicopter Pilot here in SoCal owns one and has brought it to a couple of our meetings.  Man, is it tight!  Hard for 6' me to get in and out of and there is not much shoulder room for two regular sized folks.  On the other hand, it took a week for the silly to be wiped off my face after riding and driving it around the airfield.  If I had stupid money available, I might just put one together.  For me it was more fun than the Slingshot, although the Slingshot was much more comfortable.

jdg

The earlier Type 1 through Type 3 are quite narrow, but the Type 4 introduced a few years ago has more room.

A friend in Reno has one. The last I knew he was working on some improvements. He got it from a couple who had two of them, the other was Harley powered, a Twin Cam if I remember correctly.
kk

The Harley powered one would not be a Triking, more likely a Morgan with an S&S engine. Triking has never built one using Harley engines.
Charlie

 

*IMPROVED* - Wildguzzi Amazon Affiliate Storefront!
Proceeds go back into the forum.
If you need to buy it anyway, use the affiliate link to help the forum.
Advertise Here