Visit the Wildguzzi Amazon Affiliate Store
That's a reasonable question, are there any modern sub 800cc motorcycles with hydro valve lash?
Just like Hollywood constantly resurrecting old movies, Piaggio pulls a ‘Tomaso Binelli’, sticking a Guzzi badge on something else. I wasn’t a motorcyclist back then—how well did those Guzzi-badged Binellis sell? Were they respectable? Shunned? I mean, at this point, isn’t this kinda how Husquevarna and KTM do business? Or pretty much every car manufacturer? Did you know that a number of Piaggio and Vespa scooters share the same powertrains?
A horizontal single won't fly strictly because of the nitrous oxide thing, even if it was liquid cooled.
We all wish this was a horizontal single in the Falcone style or a diminutive v twin based upon the architecture of our beloved 90*, shaft drive, but neither of those options make any sense in our modern world.The last v twin guzzi made for this particular class (A2) was the Herin head small blocks. These won't work today because of the stringent nitrous oxide emission requirements and the would be silly heavy for this class. A horizontal single won't fly strictly because of the nitrous oxide thing, even if it was liquid cooled. The Trip is exactly what Moto Guzzi needs to bring to market at this exact time in history in order to stay relevant in this particular segment. The have done a remarkable job at it and I am tickled to see it on the market.Skippy
Reading up on the Aprilia RS 457, the crank is at 270 degrees, feeling like a v-twin.
Well, it may sound more like a V-Twin, it definitely won't feel like one...
Aprilia have some interesting content on the engine here, including talking with Alessandro Galli who lead its development.https://www.aprilia.com/en_EN/rs-457-explained/
Higher revs are the issue with them.....lose accurate valve control. You can maybe can push some trick modern hydraulic lifters to 8k-9k max
...but it's not a big deal to deal with shims either, at least it wasn't on my 78 GS 1000. If a valve was a bit out, I could just run to the local dealer, trade in my current shim for the correct size, pop it in, was pretty simple, just two valves per jug and good to go. I would be surprised if a valve adjustment is much of an ordeal on this motor.
It's not shims one is dealing with! If any valve is out of spec. then the whole complete cam follower/bucket is replaced. That's all fine and dandy if the DIY owner or dealer has all the buckets in stock, if they have to be ordered then that's a bit aggravating. Cams have to come out as well...
Right?!?Besides he said "run to the local dealer" Yeah, I'll just pop out for a 2-3 hour round trip in the middle of a job.
Hopefully, Aprilia has much better quality control on the 457's than they did on the RXV/SXV 450/550 V-Twin engines. Alan Noland, who disassembled and reassembled over 300 of those engines said he never saw more than 3 of the 8 valves that had the proper clearances even when those engines were brand new.Once he got done with the reassembly, they were great machines!!!
My limited experience when checking shims, was most didn't need changing. Kev, don't you have several bikes?? Seems like you wouldn't need to sweat a two day wait to get the shim you need sent to you.