Author Topic: Trip 500 info  (Read 4331 times)

Offline Yan

  • Hatchling
  • **
  • Posts: 53
  • Location: BC, Canada
Re: Trip 500 info
« Reply #30 on: October 28, 2026, 07:14:12 PM »
That's a reasonable question, are there any modern sub 800cc motorcycles with hydro valve lash?

Google AI:

Notable Sub-800cc Motorcycles with Hydraulic Valves

Honda Nighthawk 750   747cc Inline-4   1991–2003 (Later for global markets)   One of the very few DOHC multi-cylinder bikes with zero-maintenance hydraulic adjusters.
Kawasaki Vulcan 750   749cc V-Twin   1985–2006   Features hydraulic lifters, making it completely maintenance-free in the valvetrain.
Honda Pacific Coast (PC800)   800cc V-Twin   1989–1998   Sitting right at the 800cc border, this legendary sport-tourer used hydraulic lifters for ultimate low-maintenance touring.
Honda Shadow 700 / 750 / 800   700cc–800cc V-Twins   1980s variants   Early generations of the liquid-cooled Shadow V-twins utilized hydraulic valve setups. (Note: Modern 750 Shadows went back to mechanical lock-nuts).

(so it depends on your definition of 'modern')
« Last Edit: October 28, 2026, 07:15:27 PM by Yan »
2007 Griso 1100

Online inditx

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 1621
  • Location: KC Area
Re: Trip 500 info
« Reply #31 on: October 28, 2026, 07:38:42 PM »
I don’t know, if I wanted an Aprilia I’d buy one, I said snappin my suspenders  :thumb:
inditx
inditx

This is the day.....

Offline bad Chad

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 10076
  • Location: Central Il
Re: Trip 500 info
« Reply #32 on: October 28, 2026, 07:52:20 PM »
So none.
2025 V85TT
1988 YX600 Radian
2016 CSC 250TT

Online Dirk_S

  • www.dirkshearer.com
  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 2502
  • Doodler of doodles
    • www.DirkShearer.com
  • Location: Portland, Maine, U.S.
Re: Trip 500 info
« Reply #33 on: October 28, 2026, 08:01:47 PM »
Just like Hollywood resurrecting old movies, Piaggio pulls a ‘Tomaso Benelli’, sticking a Guzzi badge on something else. I wasn’t a motorcyclist back then—how well did those Guzzi-badged Binellis sell? Were they respectable? Shunned? I mean, at this point, isn’t this kinda how Husquevarna and KTM do business? Or pretty much every car manufacturer? Did you know that a number of Piaggio and Vespa scooters share the same powertrains?
« Last Edit: October 28, 2026, 10:11:45 PM by Dirk_S »
Current: '18 Guzzi V7 III Rough, '17 Guzzi V9 Bobber, ‘78 BMW R80/7, 1986 Sputnik sidecar

Previous: '16 Guzzi V7 II Stone, ‘15 Ural Gear Up, '11 Suzuki TU250X, ‘86 Guzzi V65 Lario, '78/‘80 Honda CX500, '77 Kawasaki KZ400 Special

Online Antietam Classic Cycle

  • Gaggle Hero
  • *****
  • *
  • Posts: 15228
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: Trip 500 info
« Reply #34 on: October 28, 2026, 08:18:46 PM »
Just like Hollywood constantly resurrecting old movies, Piaggio pulls a ‘Tomaso Binelli’, sticking a Guzzi badge on something else. I wasn’t a motorcyclist back then—how well did those Guzzi-badged Binellis sell? Were they respectable? Shunned? I mean, at this point, isn’t this kinda how Husquevarna and KTM do business? Or pretty much every car manufacturer? Did you know that a number of Piaggio and Vespa scooters share the same powertrains?

Alejandro De Tomaso. I've never seen any sale figures for the Guzzi badged Benellis, I'm not sure any were sold in the US. 
Charlie

Offline skippy

  • Gaggle Hero
  • *****
  • Posts: 755
Re: Trip 500 info
« Reply #35 on: October 28, 2026, 08:49:58 PM »
We all wish this was a horizontal single in the Falcone style or a diminutive v twin based upon the architecture of our beloved 90*, shaft drive, but neither of those options make any sense in our modern world.
The last v twin guzzi made for this particular  class (A2) was the Herin head small blocks. These won't work today because of the stringent nitrous oxide emission requirements and the would be silly heavy for this class. A horizontal single won't fly strictly because of the nitrous oxide thing, even if it was liquid cooled.
The Trip is exactly what Moto Guzzi needs to bring to market at this exact time in history in order to stay relevant in this particular segment.
The have done a remarkable job at it and I am tickled to see it on the market.

Skippy
23 V100 Mandello
20 V85TT

Online Antietam Classic Cycle

  • Gaggle Hero
  • *****
  • *
  • Posts: 15228
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: Trip 500 info
« Reply #36 on: October 28, 2026, 09:23:57 PM »
A horizontal single won't fly strictly because of the nitrous oxide thing, even if it was liquid cooled.

If that's the case, then how does the horizontal single engine in the Piaggio MP3 530 meet emissions regulations? It obviously does, since it's sold in the US.





Charlie

Online Dr. Enzo Toma

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 745
  • Location: Colorado, US
Re: Trip 500 info
« Reply #37 on: October 29, 2026, 12:09:35 AM »
We all wish this was a horizontal single in the Falcone style or a diminutive v twin based upon the architecture of our beloved 90*, shaft drive, but neither of those options make any sense in our modern world.
The last v twin guzzi made for this particular  class (A2) was the Herin head small blocks. These won't work today because of the stringent nitrous oxide emission requirements and the would be silly heavy for this class. A horizontal single won't fly strictly because of the nitrous oxide thing, even if it was liquid cooled.
The Trip is exactly what Moto Guzzi needs to bring to market at this exact time in history in order to stay relevant in this particular segment.
The have done a remarkable job at it and I am tickled to see it on the market.

Skippy

You (likely unintentionally) got a laugh out of me with the "nitrous oxide" emissions comment. We'd all be more calm and joyous of riders if that's what was coming out of tailpipes instead of nitrogen dioxide!
The USA has VERY lenient tailpipe emissions relative to the EU and the many other countries in the world that base their emissions requirements on the EU ones, but even meeting EU emissions there are big singles. I suspect the reason there aren't big horizontal singles outside of Maxi Scooters is because of the limitations of packaging one into a motorcycle, and the cost to develop an entirely new engine design rather than evolve an existing one.

I agree it seems like a nice bike though and will hopefully be a great fit for this market. Sure it isn't expected to be made in Italy, but Moto Guzzi took an engine manufactured under the Piaggio umbrella, instead of outsourcing to an unrelated company. It is still a Piaggio plant in India making the engines for Aprilia and now Moto Guzzi, not like they partnered with an outside company like Bajaj to build engines for them under a third party design.

Aprilia have some interesting content on the engine here, including talking with Alessandro Galli who lead its development.
https://www.aprilia.com/en_EN/rs-457-explained/
« Last Edit: October 29, 2026, 12:13:05 AM by Dr. Enzo Toma »
2027 Moto Guzzi V7 Sport
MGNOC Member

Offline DaSwami

  • Gaggle Hero
  • *****
  • Posts: 545
  • Location: NW Montana
Re: Trip 500 info
« Reply #38 on: October 29, 2026, 05:33:13 AM »
Reading up on the Aprilia RS 457, the crank is at 270 degrees, feeling like a v-twin.

Well, it may sound more like a V-Twin, it definitely won't feel like one...

Online chuck peterson

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 5540
  • Location: New Haven CT
Re: Trip 500 info
« Reply #39 on: October 29, 2026, 06:49:10 AM »
Looking at the main webpage for Aprilia I see it seems to be a duplicate to the Tuono 457…?

Anything different?

https://www.aprilia.com/us_EN/models/tuono-457/tuono-457-457-parallel-twin-4-stroke-2025/
"I'd like to thank all my friends who have kept my Guzzi's going, but mostly...TOMB."
150k on Verts
750 Nevada
400f
R5 Yammie
BV250
4x 1976 Moto Demm Smily,, now 5, oops now 6, oops now 7
1980 SP1000 in little bits and pieces

Offline SIR REAL ED

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 3312
  • uh.... it's personal....
  • Location: Forest, VA
Re: Trip 500 info
« Reply #40 on: October 29, 2026, 07:26:14 AM »
Well, it may sound more like a V-Twin, it definitely won't feel like one...

You might be surprised if you ride one.  I've heard many riders say the 270 degree parallel twin engine "feels" very similar to a 90 degree V-twin.

Of course, nothing is more subjective than "feelings."

https://www.youtube.com/watch?v=sr_yaZQmRzA

1999 Suzuki DR 650 w/790cc kit
2002 MZ Skorpion
1994 DR Skorpion

Offline SIR REAL ED

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 3312
  • uh.... it's personal....
  • Location: Forest, VA
Re: Trip 500 info
« Reply #41 on: October 29, 2026, 07:36:32 AM »

Aprilia have some interesting content on the engine here, including talking with Alessandro Galli who lead its development.
https://www.aprilia.com/en_EN/rs-457-explained/

Interesting video.  Thanks for posting.
1999 Suzuki DR 650 w/790cc kit
2002 MZ Skorpion
1994 DR Skorpion

Offline Chuck in Indiana

  • Gaggle Hero
  • *****
  • *
  • Posts: 29709
Re: Trip 500 info
« Reply #42 on: October 29, 2026, 08:06:07 AM »
My grandkid has one of the race replica Apes, and it definitely sounds bitchin'.
Trip? Just a little harder core than the Stone..  :smiley:
Chuck in (Elwood) Indiana/sometimes SoCal
 
87 AeroLario
95 Skorpion tour
26 Triumph trident 800
"Social media made y'all way too comfortable with disrespecting people and not getting punched in the face for it."

Mike Tyson

Online PeteS

  • Gaggle Hero
  • *****
  • Posts: 3798
Re: Trip 500 info
« Reply #43 on: October 29, 2026, 08:29:52 AM »
So it sounds like this is just a rebadged Aprilia but most every review of the RS and Tuono seems mostly positive.
I am guessing Piaggio just wanted to give dealers a bike that would appeal to newer riders and those wanting to downsize. Walk into a Guzzi dealer now and you need at least $10K in your pocket. If this comes in at under $6k it should generate a lot more traffic. The engine sounds pretty amazing with many reporting the Aprilias will top 120 mph.
Close to what the V7s and V85s can do. I don’t think if Guzzi had tried to develop a 500cc V twin with hydraulic valves they could get close to that price point.

That bike is lighter and has more power than my KLR. I’d like them to make an adventure bike is that category using that motor.

Pete
« Last Edit: October 29, 2026, 08:31:14 AM by PeteS »

Offline Moparnut72

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 3388
  • Location: Quincy California
Re: Trip 500 info
« Reply #44 on: October 29, 2026, 08:32:10 AM »
I hope this new introduction doesn't follow the Harley model with the brand faithful trashing a total new concept. Also dealers sticking them in the very back of the showroom. MG is looking ahead instead of the same old thing. The V100's were a start. Even though the V100's weren't door busters it was a move in the right direction which needs to continue for the brand to continue to be successful. As far as radiators go there is no need to look beyond Triumph T100/120's, it is hard to even see them.
kk
Mopar or Nocar
Current Bike:
2026 Triumph T120
1976 T3 disaster

Taking new riders for a spin:
2023 V100 Navale
2019 V7lll Special
2016 Audace
MGNOC #24053
Amiga computer shop owner: "Americans are great consumers but terrible shoppers".

Offline CoolBreezeBreva

  • Hatchling
  • **
  • Posts: 39
Re: Trip 500 info
« Reply #45 on: October 29, 2026, 10:10:27 AM »
Woulda been cool if it had been called the Trip if it had a 3 cylinder TRIPle motor. Yes, Triumph can pay me royalties for this name is they decide to use it lol

Offline Ed / AF1 Racing

  • Hatchling
  • **
  • Posts: 73
  • Location: Austin, TX
Re: Trip 500 info
« Reply #46 on: October 29, 2026, 10:46:26 AM »
That's a reasonable question, are there any modern sub 800cc motorcycles with hydro valve lash?

not aware of any.  Higher revs are the issue with them.....lose accurate valve control.  You can maybe can push some trick modern hydraulic lifters to 8k-9k max

Online Dr. Enzo Toma

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 745
  • Location: Colorado, US
Re: Trip 500 info
« Reply #47 on: October 29, 2026, 12:57:26 PM »
Not a sub-800cc engine, but the Harley-Davidson RevMax engines have "roller-finger valve actuation with hydraulic lash adjusters" and they redline at 9,500 RPM.
It is a way more complex engine than their simpler and lower revving air and oil cooled Milwaukee-Eight though.

https://h-dmediakit.com/us/news-articles/harley-davidson-revolution-max-1250-engine-is-tuned-for-adventure.html
2027 Moto Guzzi V7 Sport
MGNOC Member

Offline Tusayan

  • Gaggle Hero
  • *****
  • Posts: 1914
Re: Trip 500 info
« Reply #48 on: October 29, 2026, 01:55:26 PM »
Higher revs are the issue with them.....lose accurate valve control.  You can maybe can push some trick modern hydraulic lifters to 8k-9k max

The 1984 Honda Nighthawk 700S revved to 10,700 redline with hydraulic lifters. 

Offline kingoffleece

  • SplitWeight(tm) seat covers
  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 4667
  • Rated 5 STARS Motorcycle Consumer News
  • Location: Valley of the Sun
Re: Trip 500 info
« Reply #49 on: October 29, 2026, 02:08:43 PM »
Got to be a reason they don't make them rev that high anymore.
SplitWeight(tm) seat covers. A King of Fleece LLC product.

Offline TN Mark

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 1335
Re: Trip 500 info
« Reply #50 on: October 29, 2026, 03:21:10 PM »
Sharing components between brands under the same corporate umbrella has been going on for many, many decades. It makes the most sense in nearly every instance. Especially for Moto Guzzi, sharing components with Aprilia has most certainly been the right course.

Yes, the 457 engine is the same between brands. It's a tried and true engine as far as everything I've read. Is the tuning the same? Doubtful.
The Aprilia Tuono 457 or the Aprilia RS 457 look nothing like the Moto Guzzi Trip version.

I also hope the red suspender snapping 'Guzzi faithful' don't treat The Trip like Harley riders treated the V-Rod. The Trip is within the same corporate structure and the bike looks like a Moto Guzzi.

Like your mom likely told you decades ago: If you don't have anything constructive to say, don't say anything at all.
« Last Edit: October 29, 2026, 05:25:10 PM by TN Mark »

Offline bad Chad

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 10076
  • Location: Central Il
Re: Trip 500 info
« Reply #51 on: October 29, 2026, 03:39:20 PM »
I had a 96 NightHawk 750 with Hydro valves, red line was 8500.   Hydraulic adjustment is nice, but it's not a big deal to deal with shims either, at least it wasn't on my 78 GS 1000.  If a valve was a bit out, I could just run to the local dealer, trade in my current shim for the correct size, pop it in, was pretty simple, just two valves per jug and good to go.   
I would be surprised if a valve adjustment is much of an ordeal on this motor.
2025 V85TT
1988 YX600 Radian
2016 CSC 250TT

Online Kev m

  • Not your normal Hombre
  • Gaggle Hero
  • *****
  • Posts: 31459
  • Yo from Medford, NJ
Re: Trip 500 info
« Reply #52 on: October 29, 2026, 04:17:59 PM »
The difference between the old Guzzi crowd and the old Harley crowd is that the Guzzi people are not sheeple and the young ones attracted to Guzzi in the first place won't be scared away by the attitudes of the crazy old Guzzi men.
Current Fleet

18 Guzzi V7III Carbon Dark
13 Guzzi V7 Stone
11 Duc M696

Online Antietam Classic Cycle

  • Gaggle Hero
  • *****
  • *
  • Posts: 15228
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: Trip 500 info
« Reply #53 on: October 29, 2026, 04:32:10 PM »
...but it's not a big deal to deal with shims either, at least it wasn't on my 78 GS 1000.  If a valve was a bit out, I could just run to the local dealer, trade in my current shim for the correct size, pop it in, was pretty simple, just two valves per jug and good to go.   
I would be surprised if a valve adjustment is much of an ordeal on this motor.

It's not shims one is dealing with! If any valve is out of spec. then the whole complete cam follower/bucket is replaced. That's all fine and dandy if the DIY owner or dealer has all the buckets in stock, if they have to be ordered then that's a bit aggravating. Cams have to come out as well... 
Charlie

Offline Ed / AF1 Racing

  • Hatchling
  • **
  • Posts: 73
  • Location: Austin, TX
Re: Trip 500 info
« Reply #54 on: October 29, 2026, 05:16:23 PM »
the bucket being the shim isnt really any different than having a shim under bucket design which is found in most modern DOHC engines.   Cams would come out for both styles.     I havent seen a shim-over-bucket in a long time.

The aprilia 457 buckets are $13.99 retail each, and we have a full selection in stock



Online Kev m

  • Not your normal Hombre
  • Gaggle Hero
  • *****
  • Posts: 31459
  • Yo from Medford, NJ
Re: Trip 500 info
« Reply #55 on: October 29, 2026, 06:01:01 PM »
It's not shims one is dealing with! If any valve is out of spec. then the whole complete cam follower/bucket is replaced. That's all fine and dandy if the DIY owner or dealer has all the buckets in stock, if they have to be ordered then that's a bit aggravating. Cams have to come out as well...

Right?!?

Besides he said "run to the local dealer"  :grin: :laugh: :grin:

Yeah, I'll just pop out for a 2-3 hour round trip in the middle of a job.

 :boozing:
Current Fleet

18 Guzzi V7III Carbon Dark
13 Guzzi V7 Stone
11 Duc M696

Offline bad Chad

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 10076
  • Location: Central Il
Re: Trip 500 info
« Reply #56 on: October 29, 2026, 06:37:40 PM »
Right?!?

Besides he said "run to the local dealer"  :grin: :laugh: :grin:

Yeah, I'll just pop out for a 2-3 hour round trip in the middle of a job.

 :boozing:

My limited experience when checking shims, was most didn't need changing.   Kev, don't you have several bikes??  Seems like you wouldn't need to sweat  a two day wait to get the shim you need sent to you. :boozing:
2025 V85TT
1988 YX600 Radian
2016 CSC 250TT

Offline SIR REAL ED

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 3312
  • uh.... it's personal....
  • Location: Forest, VA
Re: Trip 500 info
« Reply #57 on: October 29, 2026, 06:58:30 PM »

Hopefully, Aprilia has much better quality control on the 457's than they did on the RXV/SXV 450/550 V-Twin engines. 

Alan Noland, who disassembled and reassembled over 300 of those engines said he never saw more than 3 of the 8 valves that had the proper clearances even when those engines were brand new.

Once he got done with the reassembly, they were great machines!!!

1999 Suzuki DR 650 w/790cc kit
2002 MZ Skorpion
1994 DR Skorpion

Online PeteS

  • Gaggle Hero
  • *****
  • Posts: 3798
Re: Trip 500 info
« Reply #58 on: October 29, 2026, 07:07:06 PM »
Hopefully, Aprilia has much better quality control on the 457's than they did on the RXV/SXV 450/550 V-Twin engines. 

Alan Noland, who disassembled and reassembled over 300 of those engines said he never saw more than 3 of the 8 valves that had the proper clearances even when those engines were brand new.

Once he got done with the reassembly, they were great machines!!!

Thats really the question here. How good are these 457 motors. My 2004 Goldwing stayed in spec until 84000 miles when I sold it. I had to get some shims for my 2008 KLR after having to take the top end off for a cylinder bore. 2008 KLRs had an oil burning problem solved with bigger pistons and new rings. I was able to get shims from my dealer a mile down the road. Its a PITA job compared to screw adjusters but you don’t have to do it as often.

Pete

Online Kev m

  • Not your normal Hombre
  • Gaggle Hero
  • *****
  • Posts: 31459
  • Yo from Medford, NJ
Re: Trip 500 info
« Reply #59 on: October 29, 2026, 07:08:28 PM »
My limited experience when checking shims, was most didn't need changing.   Kev, don't you have several bikes??  Seems like you wouldn't need to sweat  a two day wait to get the shim you need sent to you. :boozing:

True story and I shouldn't admit this because it trashes my attitude on this bike but MY FAVORITE bike is currently on the lift (as of today) where it will likely stay for most of winter as I disassemble HALF OF IT to get to a $5 shift return spring.

Of course this job can be easier if said component could be addressed by something under a side cover instead of having to pull and disassemble the whole transmission. But I guess a lot of JAPanInc products would probably need their cases split which would be worse.

Never mind ... I'll stick with my V7'S, but I'm glad I have a spare!!!
Current Fleet

18 Guzzi V7III Carbon Dark
13 Guzzi V7 Stone
11 Duc M696

 

*IMPROVED* - Wildguzzi Amazon Affiliate Storefront!
Proceeds go back into the forum.
If you need to buy it anyway, use the affiliate link to help the forum.
Advertise Here