Author Topic: LM 2 Front Forks Question  (Read 2640 times)

Dobermann

  • Guest
LM 2 Front Forks Question
« on: July 30, 2015, 08:05:32 AM »
Hello,

My LM2 has a different fork plugs then the bikes which pictures I've found on internet. I see the plugs usually have air valves on them, but my ones are different. Do you know what fork plugs are they. Here is a video of my bike. The plugs can be seen in at the very beginning of the video.

https://www.youtube.com/watch?v=eWWTfK7mGP4

Are they some early LM2 forks? I am asking because I am considering FAC dampers. I am afraid that if I order dampers for LM2 they wont fit on my forks since they look not adjustable and they dont look like the 'standard' LM2 forks.

Thank you.
« Last Edit: July 30, 2015, 08:10:53 AM by Dobermann »

Offline mtiberio

  • Gaggle Hero
  • *****
  • Posts: 4218
    • TiberioRacing
Re: LM 2 Front Forks Question
« Reply #1 on: July 30, 2015, 10:19:23 AM »
nice video, too bad it doesn't show more of the FORKS.

top caps look custom made to me.
Land Speed Records w/Guzzzi:
SCTA M-PG 1000 141.6 MPH
LTA M-PF 1000 137.3 MPH
ECTA M-PG 1000 118.6 MPH
http://gjm.site90.com/mtiberio

Dobermann

  • Guest
Re: LM 2 Front Forks Question
« Reply #2 on: July 30, 2015, 10:40:06 AM »
Thank you, mate. Yes, I ment the plug bolts that are on top of the fork tubes. There are no air valves. The bike came like that from Germany.

Offline Arizona Wayne

  • Gaggle Hero
  • *****
  • Posts: 6257
Re: LM 2 Front Forks Question
« Reply #3 on: July 30, 2015, 12:22:19 PM »
I have a CX100, same as your LM II w/a SP motor.  It has plug caps w/a recessed hex bolt in the middle for the fork/shock cartridges.
« Last Edit: July 30, 2015, 12:24:40 PM by Arizona Wayne »

Vasco DG

  • Guest
Re: LM 2 Front Forks Question
« Reply #4 on: July 30, 2015, 01:11:34 PM »
Without taking them to bits you won't know what's going on but they ain't stock.

The caps with a Schraeder valve on top are almost certainly FAC dampers, a common aftermarket swap-out to replace the horrible Sebaceous originals.

Pete

Offline Arizona Wayne

  • Gaggle Hero
  • *****
  • Posts: 6257
Re: LM 2 Front Forks Question
« Reply #5 on: July 30, 2015, 01:30:24 PM »
Without taking them to bits you won't know what's going on but they ain't stock.

The caps with a Schraeder valve on top are almost certainly FAC dampers, a common aftermarket swap-out to replace the horrible Sebaceous originals.

Pete



That's funny since I have over 110K miles on my original `81 cartridges, even pulling a sidecar, and they still work just fine, IMHO..........or maybe I replaced them with the same kind and don't remember.  Did replace some cartridges but think those were on my `80 Convert. I had.   :undecided:
« Last Edit: July 30, 2015, 04:30:32 PM by Arizona Wayne »

Offline guzzista

  • Gaggle Hero
  • *****
  • Posts: 1070
  • Location: SF Bay Area
Re: LM 2 Front Forks Question
« Reply #6 on: July 30, 2015, 02:29:13 PM »
Looks like regular ol' Guzzi 35mm forks on 195mmm triples with some ( custom?) homemade caps. The camera action  goes to the rear of the bike too fast to highlight the forks . BTW , Mike, got your old race bike Marzocchi forks on my LM
nice video, too bad it doesn't show more of the FORKS.

top caps look custom made to me. 
« Last Edit: July 30, 2015, 02:31:27 PM by guzzista »
1975 750S Tribute bike, 1994 Cali 1100, 2007 Ducati GT1000, 1983 SP1000, 1973 V7Sport project, 2017 California1400 Touring

***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
Best quality vinyl available today. Easy application.
Advertise Here
 

20 Ounce Stainless Steel Double Insulated Tumbler
Buy a quality tumbler and support the forum at the same time!
Better than a YETI! BPA and Lead free.
Advertise Here